Tac Sport internals

[praetorian97]

This may be a dumb question but are the Tac Sport internals the same as the CZ 75 internals?

More specifically...will the spare parts I've bought for my SP01 work on a Tac Sport?

[eerw]

Some will.

Trs, trigger bar, slidestop , safeties are different. There is probably something I missed.

[kneelingatlas]

The trigger bar is a different design, which parts are you talking about?

[praetorian97]

I'm just putting a parts kit together for my SP01 and curious about what will work for a TAC sport. (Springs, Pins, etc....) Every now and again I get a wild hair and think about going all CZ

[asimonp79]

Addign to what the gents above me wrote:

Sear cage ( your ejector is different) is not as in Shadow

You don't have the disconnector on TS , thus the TS hammer will not have the holes for the pin N9

Not same magazines thus not same followers, mag springs, basepads.

There is no " trigger bar lifter spring" in TS.

The trigger return spring is different, the trigger is different ( in case we are talking that Shadow is DA/SA).

Magwell ( in case of SAO) will not fit

What else? well if your TS is 40 cal - than your extractor is different, you may buy 2 -dot that fits them both, but if you are not and using 1 dot vs 3 dot- notch is different.

I am not sure that mag catch is the same

The standard blade for FO front sight for T.S. is 7.5mm, while on shadow from factory- 5.5mm ( if the rear is Fixed).

Thats about it