Steve RA Posted January 31, 2015 Share Posted January 31, 2015 The KKM "gunsmith fit" ones are very good, unfortunately I don't think they have that one available any more. If you buy direct from any of the mfrs, send them a dummy round with the order and ask them to ream to that. Will save you a return or gunsmith trip. Link to comment Share on other sites More sharing options...
midvalleyshooter Posted January 31, 2015 Author Share Posted January 31, 2015 The conversion barrels sound like they work fine and i was going to get one. Then I found a good deal on a G34 and bought that instead. Thanks again for all the input, Keith Link to comment Share on other sites More sharing options...
Hallz Posted February 3, 2015 Share Posted February 3, 2015 My 9-40 KKM work great from mfg. With any properly sized ammo that meets SAAMI spec's. Link to comment Share on other sites More sharing options...
BigBoss Posted February 6, 2015 Share Posted February 6, 2015 If your worried about the ejector and extractor issues have a Glock certified armorer or pistol smith order them and show you how to switch them out. It's quite simple less than 2 min tops they cost 5 for the housing w/ejector which you can just pull out and 10 for the LCI extractor. Link to comment Share on other sites More sharing options...
Mell531 Posted February 8, 2015 Share Posted February 8, 2015 The Glock barrels I like are KKM 1:20 rifling twist and Storm Lake 1:16 rifling rifling twist. Link to comment Share on other sites More sharing options...
dossauce Posted February 20, 2015 Share Posted February 20, 2015 Well you bought a 34 but I'll throw in my 2c. I have a 34 and a 35 and also a kkm conversion for the 35. I choose to shoot the conversion 35 over the 34 all the time, the barrel adds mass and I don't have to worry about changing accessories between guns. Plus now you already have the 9mm extractor and ejector. I only ever change the ejector though, no problems with the extractor Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now