Gussers Posted April 25, 2016 Share Posted April 25, 2016 I have a question I have a Tactical Sport in 9mm that I picked up used for a good price for 3 gun. I am thinking of shooting IPSC Standard division is it possible to do the conversion the other way with the Tactical sport ie put a .40 barrel in a 9mm slide or is the breech face different between the 9mm and .40 TS slide. Thanks Blake You are correct. The .40 barrel can be fitted to the 9mm slide, but the breech face is too small for .40 brass. So, 9mm TS to .40 TS conversion is not possible. I have a .40 TS in which I've fitted a 9mm barrel. The breech face is a little large for 9mm, but it works flawlessly. As for mags, I've used .40 in the TS 9mm mags too. It fed and cycled fine, but the capacity wasn't as it should be. Link to comment Share on other sites More sharing options...
anaxagoras Posted May 26, 2016 Share Posted May 26, 2016 I watched the youtube video and the guy says to file a different part of the barrel than the picture on the first page. Now I only notice this after I started filing my barrel based on the video and deciding to come and check here to see if i was doing it right because something didn't seem right. So which part do you file? if looking at the breach of the barrel there is the pad at 12 o'clock which the picture says to file. And the entire 9 o'clock surface and the small triangle at 2 o'clock which the video says to file Link to comment Share on other sites More sharing options...
rancher5 Posted May 26, 2016 Share Posted May 26, 2016 (edited) Bought a 40 TS ,complete top end for one of 2 TS 9's I own , 40 upper fits perfect on one frame, but would need work to fit the other 9 lower, it's way to tight, yes I was off point, new ideas ,Sent from my SM-T350 using Tapatalk Edited May 26, 2016 by rancher5 Link to comment Share on other sites More sharing options...
batesd Posted September 16, 2016 Share Posted September 16, 2016 So, just to ask the question again....are we taking material off the pad at the 12 o'clock position or the 9 and 2 o'clock positions? Link to comment Share on other sites More sharing options...
kneelingatlas Posted September 16, 2016 Share Posted September 16, 2016 6 hours ago, batesd said: So, just to ask the question again....are we taking material off the pad at the 12 o'clock position or the 9 and 2 o'clock positions? 9 and 2 not the tit at 12 Link to comment Share on other sites More sharing options...
bigdave24 Posted September 17, 2016 Share Posted September 17, 2016 Rancher5, I just needed to lap the slide a bit when I put a .40 upper on my 9 mm TS frame and it was too tight. Link to comment Share on other sites More sharing options...
Gridlock Posted September 17, 2016 Share Posted September 17, 2016 So do u need to buy new mags or can the 40 work with 9mm Link to comment Share on other sites More sharing options...
kneelingatlas Posted September 17, 2016 Share Posted September 17, 2016 6 hours ago, Gridlock said: So do u need to buy new mags or can the 40 work with 9mm 9mm mags are more reliable than 40 when shooting 9mm, I found the last round would jam every time. Link to comment Share on other sites More sharing options...
Gridlock Posted September 17, 2016 Share Posted September 17, 2016 Cool thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now