break down on stock 2

[dlp40cal]

i just got a stock 2 new at the tanfoglio guns how do tear down and reassy of stock 2 how does pin come out slide and go back thanks for any help guys.

[kneelingatlas]

Here are the steps for a CZ, for purposes of routine cleaning it's essentially the same.

http://www.brianenos.com/forums/index.php?showtopic=191773&page=1

Edited April 6, 2014 by kneelingatlas

[dlp40cal]

thanks for info.

[dhf]

Check out henningshootsguns.com he's got some good videos on disassembly/reassembly

[dlp40cal]

thanks

[bayougump]

Henning's assemble and disassemble vids are very good. I was in the same boat not long ago. Also the resident intellects on this forum ie atlas and nealio are most helpful

Sent from my flux capacitor

[Onagoth]

Hennings videos helped me quite a bit. But I wouldn't recommend disassembling the sear housing just for the heck of it....that was is tricky to get back together, especially so with the 2 piece sear.

The plunger can also be a bit tricky.

[dlp40cal]

thanks guys

[zsavage81]

"Hennings videos helped me quite a bit. But I wouldn't recommend disassembling the sear housing just for the heck of it....that was is tricky to get back together, especially so with the 2 piece sear.

The plunger can also be a bit tricky."

If you wanna make the sear reassembly easy you need to make a slave pin, but I agree not, really any reason to take that apart unless you break something (I broke the leg off the spring and had to replace it is how I know).

[Mo Hepworth]

you can do yourself a favor...and ditch that AMBI safety for a single sided safety...depending on your hand size,...the extended or Custom size safety. Makes dissasembly a bit easier.