Dels Posted April 4, 2014 Share Posted April 4, 2014 Would anyone have some data on Bayou 124 RN or BBI 125 RN over IMR 7625? Most of the data I find is for plated or jacketed HP or Berry's with the hollow back. I did see the IMR 7625 thread over on the CZ forums for a load for the BBI, but wanted to see if there were others out there. Thanks! Sent from my HTC One using Tapatalk Link to comment Share on other sites More sharing options...
rocice Posted April 4, 2014 Share Posted April 4, 2014 http://www.hodgdonreloading.com/data/pistol Link to comment Share on other sites More sharing options...
Dels Posted April 4, 2014 Author Share Posted April 4, 2014 http://www.hodgdonreloading.com/data/pistol Thanks. When I punched in my data I got info for the Berry's bullet. Is it safe to assume that I can use the data for a plated hollow back bullet for a coated flat base one? Sent from my HTC One using Tapatalk Link to comment Share on other sites More sharing options...
bowenbuilt Posted April 4, 2014 Share Posted April 4, 2014 I use 4.6 for 124/125 jacketed/plated at 1.110 4.2 for 124/125 coated at the same OAL 3.6 for 147 plated/jacketed at 1.145 3.4 for 147 coated at 1.120 All do 130 PF in my guns YMMV. Link to comment Share on other sites More sharing options...
Dels Posted April 4, 2014 Author Share Posted April 4, 2014 Thanks! Sent from my HTC One using Tapatalk Link to comment Share on other sites More sharing options...
Smitty79 Posted April 5, 2014 Share Posted April 5, 2014 I use 4.6 for 124/125 jacketed/plated at 1.110 4.2 for 124/125 coated at the same OAL 3.6 for 147 plated/jacketed at 1.145 3.4 for 147 coated at 1.120 All do 130 PF in my guns YMMV. I'm about .2gns higher than this. But I'm only shooting out of a 4.5in barrel and going for 132 pf. Link to comment Share on other sites More sharing options...
Calishooter Posted April 5, 2014 Share Posted April 5, 2014 I use 4.6 for 124/125 jacketed/plated at 1.110 4.2 for 124/125 coated at the same OAL 3.6 for 147 plated/jacketed at 1.145 3.4 for 147 coated at 1.120 All do 130 PF in my guns YMMV. Good info, I got lucky last month to find 8lb jug of this powder, will do some testing soon! Link to comment Share on other sites More sharing options...
dave33 Posted April 5, 2014 Share Posted April 5, 2014 I use 4.6 for 124/125 jacketed/plated at 1.110 4.2 for 124/125 coated at the same OAL 3.6 for 147 plated/jacketed at 1.145 3.4 for 147 coated at 1.120 All do 130 PF in my guns YMMV. I also use 3.4 under 147gr lead or coated in my XDM 5.25. Very soft and very accurate. Link to comment Share on other sites More sharing options...
Dels Posted April 5, 2014 Author Share Posted April 5, 2014 I use 4.6 for 124/125 jacketed/plated at 1.110 4.2 for 124/125 coated at the same OAL 3.6 for 147 plated/jacketed at 1.145 3.4 for 147 coated at 1.120 All do 130 PF in my guns YMMV. Good info, I got lucky last month to find 8lb jug of this powder, will do some testing soon! Nice find! Only 1 lb bottles here, but glad I could find something Link to comment Share on other sites More sharing options...
bowenbuilt Posted April 5, 2014 Share Posted April 5, 2014 my stated charges will vary plus or minus depending on barrel length and how fast the barrel is ect. These will give you a good starting point and you may have to add a tenth or 2 to get where you want to be. I have found 7625 to be an excellent powder for 9mm. It is slow enough to keep you out of trouble but just fast enough to give a really soft recoil impulse. It is clean and accurate in all of my guns and works well with most any type and weight of bullet. When you step up to .40 though that is a different ball game. It works great in 9mm minor but it is loud, flashy and gives harsh recoil compared to faster powders in .40. This has been my experience, yours may vary. Link to comment Share on other sites More sharing options...
DRobson Posted April 7, 2014 Share Posted April 7, 2014 I loaded some of the BBI 125gr with 7625 today and I was impressed. Ended up being about a 1.5" group out of my STI. My load was 4.4gr of 7625 @ 1.142 for a 130pf. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now