ToysRUs Posted January 29, 2013 Share Posted January 29, 2013 First off, OMG!!!! This is the best! So I am in the epoxy floor business and some people use a powered bucket mixer to make 3-4 gal of mix at a time. I knew where there was one sitting aound so here we go. Mixer and executive asst. I knew I would need paddles to agitate the media and brass. Bolted in 3 pieces of 3/4" angle. bolts have rubber washers on the outside. Not really much water pressure and they do not leak. 1 gal of water, Dish soap, tad bit of citric acid, 10lbs or pins and about 700 pieces of 5.56 One hour later, Rinse, tumble, towel, and ley them out. For drying they all go in a spare bathroom with the dehumidfier running. Never ever get brass this clean dry tumbling. Yea!!!! Thanks to everyone on the forum for your threads and posts with info! Link to comment Share on other sites More sharing options...
Jachin Posted January 30, 2013 Share Posted January 30, 2013 Nice looking brass! Ten pounds of what kind of "pins"? Over, Link to comment Share on other sites More sharing options...
Steve RA Posted January 30, 2013 Share Posted January 30, 2013 What is the brand name of the barrel turner, looks like it might be a neat idea?? Link to comment Share on other sites More sharing options...
Sarge Posted January 30, 2013 Share Posted January 30, 2013 http://www.globalgilson.com/productdisplay.asp?model=MA-66F Link to comment Share on other sites More sharing options...
Steve RA Posted January 30, 2013 Share Posted January 30, 2013 (edited) Found these on Google: Mixall.com http://www.mixall.com/ Looks like the #58 might be good, I've got a 3/4hp motor laying around doing nothing. We presently use pins from Pellets, LLC - the XXL size. Edited January 30, 2013 by Steve RA Link to comment Share on other sites More sharing options...
Sarge Posted January 30, 2013 Share Posted January 30, 2013 I wonder if a guy could make one that has a handle on it so you could go on a long walk and roll it down the street. Better yet, Could you convert one of those plastic lawn rollers that you pull behind a mower? Mow grass and clean brass at the same time! Link to comment Share on other sites More sharing options...
Sarge Posted January 30, 2013 Share Posted January 30, 2013 http://reviews.walmart.com/1336/10135836/18-x-24-poly-lawn-roller-reviews/reviews.htm Link to comment Share on other sites More sharing options...
Steve RA Posted January 30, 2013 Share Posted January 30, 2013 Yes, then get an immigrant with a Green Card to roll your lawn. Two birds with one stone !!! Link to comment Share on other sites More sharing options...
Sarge Posted January 30, 2013 Share Posted January 30, 2013 Link to comment Share on other sites More sharing options...
MustangGreg66 Posted January 30, 2013 Share Posted January 30, 2013 (edited) Nice, after seeing the way Jerry does it I was thinking about trying to find a used cement mixer, but this seems a bit easier and smaller for storage. Edited January 30, 2013 by MustangGreg66 Link to comment Share on other sites More sharing options...
ToysRUs Posted January 30, 2013 Author Share Posted January 30, 2013 (edited) The mixer probably has a name on it somewhere covered up with layers of Epoxy! But any of the ones you all found are the correct ones. Mine is at least 20 years old and has the gear reduction built into the top of the motor unit. I looked at mixers and the Harbor freight one is really nice and small. There is a Kobalt brand at Lowes witha plastic drum but it is big (although my store had one for $209 the other day) This is nice because it is not very big and you can pull the bucket and go right to the mop sink in the garage. I bought the small (.42)pins at Midway last week when they were $34 per bag. They are from Pellets. They seem to work fine and after cleaning 3500 pieces of 5.56 in not even two evenings during commercials I am sold. I challenge Mr. Miculek to a polish off. Edited January 30, 2013 by ToysRUs Link to comment Share on other sites More sharing options...
Steve RA Posted January 30, 2013 Share Posted January 30, 2013 Ok, thanks for another useful idea. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now