Mag springs

[StephensOutdoors]

What are you all running for springs in your Para mags? I have some new Para mags that i put Dawson extensions on. The mags came with a 13 coil "tapered" type spring design where the coils at the top & bottom are tighter or smaller than the center. After I turned 2 of those springs into spaghetti while trying to get 19-20 rounds in a mag, I cut the other ones down till they worked, which is pretty close to 11 coils. I haven't tried the Wolff springs but the ISMI springs seem to work pretty but could use a little more power. Are there other options?

[jordonhurd]

I have Arrendondo springs in my mags and get 20 rounds with no problems.

[VinceU1]

I'm running a P14 and run the Wolf +10% springs and they work well in the .45. I can get 17 rounds in the mag with Dawson base pads. They last about 18 months before I've gotta replace them.

[wackodacko]

I use the Wolf +10% springs in my 40, and I can get 21 rounds in it with the dawson extended basepad and dawson follower

[ParaGunner]

I've been using ISMI mag springs for years without any problems,no cutting coils required. If you're having trouble reaching advertised capacity with extensions then it could be your mag followers need a little radius. Dawson precision has a video about this on their website.

[Pat Miles]

The ISMI springs are the best available. They will take a small initial set and stay at that length for a long time.

Pat

[fishpinoy27]

I use Wolff +10% on mine ....