The Guy Posted October 14, 2011 Share Posted October 14, 2011 Hey Guys, looking for some help working up a load for my Glock 35 limited gun. I've never built a load specifically for a gun or PF before. I've only loaded .45 ammo for target practice. I am looking at using Unique powder and .40 cal 180gr Bayou Bullets. I am using a Lee Classic turret press if that helps any. any help i could get would be awesome thanks in advance. Link to comment Share on other sites More sharing options...
225 Fireman Posted October 18, 2011 Share Posted October 18, 2011 Find you some VVN320 and 180gr Bayou Bullet OAL 1.135 4.3gr VVN320 Link to comment Share on other sites More sharing options...
want2race Posted October 18, 2011 Share Posted October 18, 2011 I load 4.7gr of Universal at 1.180. You will have to load shorter so you'll easily make major with it. Or "SHOULD" make major with it. Still need to chrono it for your barrel of course. I just started using Bayou's. Like them a lot. Universal is a little slower and I switched to it when I was shooting lead and moly. Perfect fit with the Bayou's, for me. My first load was 4.9gr and it was 182-186PF. My Jacketed load was 5.2 and my lead was 4.8, to get 170PF. I've found the "gator snots" to be quite fast through my barrel. I wish my 1911 was a .40, I'd shoot this load through it too. Link to comment Share on other sites More sharing options...
dsmw5142 Posted October 18, 2011 Share Posted October 18, 2011 (edited) 5.0gr of Unique at 1.135 OAL gave me a pretty consistent 171-173PF out of both of my Glock 35's with 180gr BBI's. I would give that a try. The bullet profile is the same, Unique is a pretty safe medium burner and the load isn't anywhere near max with 180's if I remember correctly. While Unique is not the softest shooting powder, this load was very accurate. Edited October 18, 2011 by dsmw5142 Link to comment Share on other sites More sharing options...
Gabe Athouse Posted October 20, 2011 Share Posted October 20, 2011 Anybody have load data on this using Bullseye? Ive got a lot of it on hand. Link to comment Share on other sites More sharing options...
Blcksmk Posted October 22, 2011 Share Posted October 22, 2011 No data on Bullseye but VVN320. 3.6-4.0 GR loaded 1.135 OAL with a 180GR Bullet will do well. Link to comment Share on other sites More sharing options...
Gabe Athouse Posted October 22, 2011 Share Posted October 22, 2011 Yeah, Ive used the vvn320 before but was hoping to burn up some of this bullseye. Link to comment Share on other sites More sharing options...
zipper046 Posted October 24, 2011 Share Posted October 24, 2011 was using Precision Bullets over 5.2gr's UNIQUE for awhile. Worked well, but was smokey and had a lot of the coating residue in the barrel. Moved powder down to 4.5gr's and it was much better but not MAJOR PF. Moved to Zero jacketed bullets (not much more expensive) and Berry's plated....no smoke and 5.2gr's out of my G35 with Lone Wolf barrel are making major PF and grouping into 1.5" at 50 - 75ft (max distance at our indoor range). Z- Link to comment Share on other sites More sharing options...
D roc Posted October 26, 2011 Share Posted October 26, 2011 (edited) Anybody have load data on this using Bullseye? Ive got a lot of it on hand. 180gn Rainer, 3.4 titegroup, 1.135 OAL 180gn, Rainer, 3.2 bullseye, 1.135 OAL 180gn, laser cast, 3.2 bullseye, 1.135 OAL 180gn, Bayou, bullet, 3.4 titegroup, " This was all for my G35 for steel shooting http://www.brianenos.com/forums/index.php?showtopic=134493&st=0&p=1512774&fromsearch=1entry1512774 Edited October 26, 2011 by D roc Link to comment Share on other sites More sharing options...
Adam P. Posted October 26, 2011 Share Posted October 26, 2011 (edited) Anybody have load data on this using Bullseye? Ive got a lot of it on hand. 4.3 gr Bullseye WSP 180gr Bayou Bullet 1.135 OAL Nice, accurate load. May seem odd, but I also used the following load as well: 4.3gr of Red Dot WSP 180gr Bayou Bullet 1.135 OAL Nice and accurate as well. All loads shot from Glock 22 and M&P 40. Edited October 26, 2011 by Adam P. Link to comment Share on other sites More sharing options...
Gabe Athouse Posted October 27, 2011 Share Posted October 27, 2011 Alright. Thanks for the data. Hope to put together a handful this weekend for testing. Link to comment Share on other sites More sharing options...
D roc Posted October 28, 2011 Share Posted October 28, 2011 Anybody have load data on this using Bullseye? Ive got a lot of it on hand. I loaded some 180 Bayou at 3.5gn of BE for my G35 last night and shot them and it was nice. im trying to figure out if i want to keep loading with titegroup or go to bullseye. i couldnt tell how if they were smokey due to weather and shooting at night with lighted range...everything i shot last night was smokey with the lights hitting it. i will list some chrony results when my new one comes in next week. next i will try some HS-6, WST, N320 (if i can ever find any), and Clays. Link to comment Share on other sites More sharing options...
hab25 Posted April 11, 2012 Share Posted April 11, 2012 Just curious what your current load data is for glock 35 using universal clays stock barrel Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now