Resjudicata Posted June 24, 2010 Share Posted June 24, 2010 Anybody know who I contact to have a Leupold/Gilmore red dot, with the mover knob, worked on? The dot is very off center in the tube and the adjustments run out before getting it centered. I assume the ring inside has shifted. Thanks, Chris Link to comment Share on other sites More sharing options...
Toolguy Posted June 24, 2010 Share Posted June 24, 2010 Probably a set screw has slipped on the windage/lead knob. You may just need to loosen it, reset and tighten. However, that is only a guess. Link to comment Share on other sites More sharing options...
Action Pistolero Posted June 24, 2010 Share Posted June 24, 2010 Give Kelley Gilmore a call at 918-250-4867. The scope will probably need to be disassembled and put back together again. They used an epoxy to hold the windage guts in place. Link to comment Share on other sites More sharing options...
itchy Posted June 25, 2010 Share Posted June 25, 2010 Let us know if Gilmore will service the optic. I have a friend that bought a used one, found out that a seal was loose. Tried to send it in for service, but was told that they are no longer repairing them. Seiichi Link to comment Share on other sites More sharing options...
2alpha Posted July 3, 2010 Share Posted July 3, 2010 Make sure your base is running straight with the bore, seen many that weren't. Also some ring-base combination's end up shifting the scope to one side. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now