-
Posts
1,278 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by terrydoc
-
-
might help you
around the4 min = mark
-
16 hours ago, Blackstone45 said:
To clarify, the 5 points you listed are the ones that were specifically accepted at the GA?
That's my understanding.
-
From the IPSC Australia FB page-
All Handgun rule changes except those specifically accepted at the GA are pending verification at an Extraordinary General Meeting on 31 March 2023.-
Production Optics Light (PDOL) trial has been extended to December 31 2023
-
A new Category of “Grand Senior” for Competitors aged 70 and over has been introduced
-
Updated Handgun rulebooks may not be issued until after the EGM
- The expiry date for .357SIG in Standard and Classic Divisions was extended to December 31 2025.
- Production Optics Division under trial since 2019 was adopted as a permanent Handgun Division.
-
-
That's the difference between footprint and fit, the holes might be ok BUT the body doesn't fit
-
8 hours ago, m700 said:
Its not really a true comp, supposedly they are trying to get it into limited. The barrel ends and is not connected to the comp. The comp cuts are in the slide itself.
Same "system" as the 365 X-macro
-
So are you blaming the magazine or the AM bases?
-
Is it still a thing?
-
I'd get a cheap Uncle Mikes kydex/ plastic for your G34, then go from there when you get your CZ, you may like that type and there are plenty of manufacturers out there
-
Another was a new shooter that was supposed to engage targets from either side of a barricade. Decided that it would be easier to do a rear 360 rather than pull the pistol back and take a step to the left, much to the horror of the squad standing behind the shooting area. Only swept about 15 of his fellow competitors.
-
On 12/30/2022 at 3:29 AM, ltdmstr said:
Had an older guy at a match last summer got his feet tangled up and went down hard and was literally on top of the loaded gun with it pointing uprange. The 180 break actually occurred as he was going down. I was standing about 10 feet directly behind him and saw it all happen in slow motion. He was pretty banged up, probably had a concussion from the impact.
Similar thing a few years ago here in Australia, older Open shooter moving across the stage lateraly and slipped, lost control of the gun as he fell and it ended up underneath him muzzle pointed towards his face. Very gingerly got him up and the gun cleared, (safety was off). He was pretty beat up from the fall.
-
On 10/3/2022 at 3:35 PM, tt350z said:
Here’s an inner belt option. It’s a little pricey purchased separately, but it’s what comes included with my tactical belt rig.
It’s not your traditional loop velcro. There’s no “fuzziness” to it at all. Perfect match and very solid grip when paired with the lynx belt.
https://www.leaddevilusa.com/inner-belts/inner-belts-base-model
Also recommend a quality thigh pad. The belt is so rigid that the holster hanger will not flex out of the way. Coupled with paper thin shorts during the summer and it was pretty brutal.I started running the Kore Essential "battle"belt inner seems to work ok but if it does wreck the velco its not the cheapest of replacements.
https://www.koreessentials.com/collections/battle-belt-1-75/products/inner-liner-belt
-
On 12/16/2022 at 6:04 PM, dansedgli said:
You also hardly ever shoot.
Only takes one round to blow up and Ive put over 4000 through that gun
-
Not had 1 case issue or any other issues with the X5 that Dan used to own.
-
I have a 509t on mine, my gunsmith reversed the Holosun factory late and drilled and taped holes on the slide to match the plate, he had to trim a couple of mm off the length of the plate.
Works fine but wish it was a bit thinner.
-
Hi Brit.
I think you'll find the Alien already is on the list, (wonder how that happened) And unfortunately I think youre probably right about PDOL, makes you wonder why they even split them in the first place. Maybe it needs a bit more time to bed in with the less than ideal situation with COVID, it's as popular as PDO is here in Australia but we're just a small sample.
-
Because when Production came in to being you could'nt change anything from OEM, there are now some 'minor' changes allowed ie aftermarket mags, grip panels, sights and triggers/ springs that have been allowed. It will always stay majority factory as IPSC believe opening up like USPSA has creates a $$$ war. True or not? Not my call to make.
There will most likely be a new rulebook after any changes are ratified at the GA this month.
-
Check out the G-Code RTI belt hangers and adapters
-
Unfortunately all buckles "out of stock"
-
Do you think this will be the first time this has ever happened at a match? Don't worry they will know what the procedure is even if you dont, Thats why they use IROA.
-
17. Original parts and components offered by the OFM as standard equipment, or as an option, for a specific model handgun on the IPSC approved handgun list are permitted, subject to the following: 17.1 Modifications to them, other than minor detailing (the removal of burrs and/or adjustments unavoidably required in order to fit replacement OFM parts or components), are prohibited. Other prohibited modifications include those which facilitate faster reloading (e.g. racking or cocking handles, flared, enlarged and/or add-on magwells, etc.), and/or adding stippling. Changing the original color and/or finish of a handgun, and/or adding stripes or other embellishments is permitted.
Might be an issue
-
Schutzenmeister is the guy you want to ask IPSC IROA rangemaster
-
I'm pretty sure there is a how to video somewhere possibly either on youtube or maybe on the DAA website but yes you can. From memory you just remove the screw set up and remove the older insert and install the new magnetic one, you can put a DAA sticker over the old adjustment hole to stop crap getting inside.
-
Schutzmeister is an IPSC IROA RM contact him.
-
A good idea to do the RO course to get more familiar with the rules, wether you then choose to work matches is then at your descretion.
Optics and Mounting for a P320 X5 Legion
in Sig
Posted
or get an optic for that actual footprint