tmz
-
Posts
262 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by tmz
-
-
Yes I actually picked up the supported one, very please with it.
-
I went with the 1050 and a Mr. bullet feeder. Dillon customer service will be hard to beat. Put the old 650 to use with a inexpensive auto drive to process and primed brass.
-
I picked one up from SV that works just fine.
-
42 minutes ago, Maximis228 said:
http://rollsizer.com/roll-sizer/
Since my earlier posts Ive roll about 500K+ on the Rollsizer. between 9/40/45/223. Thing is a tank! Sold off my case pro 100 to a buddy.
The Rollsizer now has a US based distributor as well so shipping times are much lower.
Thanks so much !
-
On 4/23/2018 at 8:49 AM, Maximis228 said:
That video is of mine running. I have a forcht case feeder motor upgrade. small pistol plate feeds 9mm at over 6K/Hr. Large pistol plate feeds 40 cal at over 6K/hr.
I have both the Case pro and the Roll Sizer.
Case pro 100 + automation from case pro
Price with 1 caliber = $2000 Shipped (From IL)
Caliber Conversions = $190-$350 per.
Output = 1,500/hr
Roll Sizer
Price with 1 caliber = $1500 Shipped (From AUS)
Caliber Conversions = $75-$100 per.
Output = 6,100/hr
I would hands down go with the Roll Sizer moving forward after extensive testing.
I’m not on Facebook is there any chance I could get an email or a link to where this is being sold thank you so much Tony
-
I find it to be a very high-quality machined tool head. Threads for the dies seem to be more precise, the dies screw in just ever so slight bit tighter which seems to give it more precise tuning of the dies. I have one configured a few different ways.
-
On 3/17/2018 at 4:22 PM, V2plus25 said:
I've read good reviews about the Evolution, but even current users of those are experiencing growing pains. It would be nice to have a 1050 and an Evolution to compare them side-by-side eventually ?
Where have you read reviews on the Evolution ? Any chance you have links ?
I didn’t think these were shipping int I’ll the end of March beginning of April.
-
22 hours ago, tomv said:
Did your friend ever get back to you with drawings?
Sorry before having a chance to get any drawings together we both have sold our 650 auto drives.
-
3 hours ago, rchaas said:
SV steel insert
Sent from my iPad using TapatalkThank you so much for that !
-
If I missed it “sorry” but could someone tell me what insert this takes for the CK arms steel grips ? No selection for that model in the drop-down box. Thanks
-
2 hours ago, Sprig said:
Thank you TMZ ! I did this to mine after fighting jams at the top and so far have not had 1 .
??
-
I just used a course hand file, it cut very quickly and easily.
-
I’m running a 14 pound spring but also my gun is a 40 caliber.
Here’s a video also that will help out on fitting the spring.
-
This here
https://dawsonprecision.com/guide-rod-tool-less-kimber-4-inch-pro-carry-by-dawson-precision/
and Brownell‘s carries commander recoil springs.
-
2 hours ago, Sig0431 said:
Love the idea of this part but can't find it in the US. Anyone seen anything like this before or know of anyone in the US that makes one?
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F253390292528
-
Here’s a remedy that seems to work extremely well. Ever sense making this modification filing these ends down no more cases getting stuck at the top of the case feeder or dropping one in upside down. I think Dillon should possibly take a closer look at something like this, it stops more than one case getting to the top of the case feeder and getting jammed and stopping the case feeder from rotating along with occasionally dropping one in upside down, it’s been working very very well for me.
-
12 hours ago, LowBoost said:
@TMZ - When did you order your Evolution? Is there much of a wait/lead time? Did they got a hold of you after placing your order?
Are you picking up at their showroom?
I ordered the evolution couple weeks ago.
When I ordered it on the site it said shipping starts in March, dealer stock first followed by customer orders.
I did speak with a sales person when placing my order.
No I am not picking up from showroom I live in Michigan it will be shipped to me.
-
-
Thanks again loving all this extra information ! I had purchased the evolution and know that the revolution is the same body frame so all this information is greatly appreciated.
In your opinion can you point out what you think was upgraded in these machines over with the 1050 ?
Any extra pictures of both sides the two ahead ? ?
-
Thanks and no I did understand that was your video I was just trying to get you to post as many as possible lol waiting for mine and while I’m waiting love to see as many pictures and videos as possible.
From what it seems like it looks like there’s a spring that goes all the way around the edge of the shell plate to help keep the cases more stable, is that correct ?
Once again thanks for any additional information or any close-up pictures of any of the area of the machine.
-
kernelofwisdom Thanks so much for the added information and great pictures !!!
Maybe if you find yourself with a little bit extra time want to shoot a video loading some of that super comp there at the bench on that new machine that would be awesome, anyways great work with the pictures and information thank you so much
-
Thanks for the video have seen this one along with all the ones on YouTube was hoping to hear from someone that may have one of these units themselves and did some reloading already on one.
Anyone else ?
-
Would love to hear from anyone that had a chance to pull the handle on one of these at the shot show or maybe even loaded some bullets on one.
Anyone ?
-
Aluminum grips
in 1911-style Pistols
Posted
Mines is holding up extremely well, shoot nothing but major loads through it, don’t know the exact round count but going strong.