tmz
-
Posts
262 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by tmz
-
-
35 minutes ago, SSGJohnV said:
“updated shell plate retention”
-
Found a little bit more info.
https://outdoors.natchezss.com/search?w=frankford progressive
-
5 hours ago, Sigarmsp226 said:
There is a guy (George 16) who's stereo I can relate too - Marantz Receiver, Twin Head cassette recorder/player, and Bose 301's in the background.....Now that is the right way to listen to music.....Mark
1 hour ago, George16 said:@Dirtbag, glad you found my thread re camera system. I installed the camera to make sure the case is primed because there were instances in. The past wherein I forgot to put more primers after the alarm went off. I got carried away pulling the crank until I noticed the spilled powder on my table.
@Sigarmsp226, you forgot to mention the Infinity QB speakers with the EMIT twitters underneath the 301’s
.
Not to get off subject but U2 rock knowing the old Marantz looks like a 2270 ?
My Instagram user nameMarantz19
-
34 minutes ago, tmz said:
Sorry posted from my phone and if you leave auto rotate off on a cell phone it shows in large screen.
you can go to the post above that and follow the link and instructions and watch it full screen landscape mode.
PS posted a second video with the correction of rotation.
-
43 minutes ago, BiknSwans said:
Thanks! Is there a way to view this video in landscape mode? I couldn't figure it out on Safari or Firefox.
1 minute ago, Steve RA said:Interesting, be a little easier to watch if you did not have to lay on your right side to watch it.
Sorry posted from my phone and if you leave auto rotate off on a cell phone it shows in large screen.
you can go to the post above that and follow the link and instructions and watch it full screen landscape mode.
-
-
I found this click on the link go to video 2 fast forward to 48 minutes into the video.
https://app.myoutdoortv.com/series/shotshow2021productshowcase
-
15 hours ago, cbrussell said:
“tmz,” have the videos posted yet?
I’ve been looking but can’t find it yet...
-
This info is from today.
I was told towards the end of the year.
FX-10 Marketing Video
These channels will have the video live starting on January 25th. I forgot to say that but you will just need to search Frankfrord Arsenal and the video will show up after the 25th of this month. I will put the links below
www.outdoorchannel.com
www.thesportsmanchannel.com
Kind Regards,
Kyle
Customer Service Specialist
American Outdoor Brands
-
10 minutes ago, Michael303 said:
Gotcha. I have no experience with any of the Mk7 equipment so I appreciate the feedback. I really like my Dillon but I'd really like to add another station for powder check so it's good to know I can mix and match without issue.
Lot of extra room on the mark 7 tool head to accomplish just about anything. Sent you a PM
-
A few different reasons, I think it’s more reliable than the Mark 7 case feeder also quieter without that spring throwing brass around inside of it and last the Dillon has the low-voltage set up which makes it easier to add my counter to it. Just my preferences.
-
1 hour ago, Michael303 said:
I actually read through your thread the other day when I was looking for some info on ditching the Dillon powder safety rod for the spring setup. Great stuff. I'm going to give it a try.
Were you able to purchase a stripped down Mark7 or piece it together? Or did you just sell or store the case feed that came with your kit?
From what I’ve been told you can buy a strip down Mark 7 personally I don’t know that for sure I purchased complete and sold the case feeders.
Thanks Tony
-
Not only do I use the Dillon Powder drops without any issues I don’t use the safety rod. I use a double return spring I also prefer the Dillon case feeder, just my preference.
-
If chance you’re running something like that Dillon 1050 might want to double check that your tool head bolt hasn’t worked a little bit loose or even a Mark7
-
No not really they seem to work fine it just seemed to be so cluttered there wasn’t an easy way to set things up so it was nice and clean.
-
I have done it but then I switched things around and ran one case feeder with two bullet feeder’s.
-
16 hours ago, evilbeef54 said:
about 10... brand new 1100 and brand new M7, the 1100 runs smooth as can be, the M7 clutch kicks in and locks up as soon as the brass enters the de-priming die!!!
Not sure about others but I truly think 10 rounds is not enough to determine that the press is running completely smooth. Personally I would’ve ran more close to 1000 to familiarize myself with the new press and make sure all the functions are consistent and working properly before I put an auto drive on it with a very sensitive clutch system that might pick up something that you’re not picking up after just 10 rounds. Simple little things like the index not working properly or the primer slide or many other things could cause resistance in the cycling on the press with a sensitive clutch systems picking it up but not known because there was only 10 rounds cycled through the unit manually, just my two cents.
-
How many rounds have you loaded on the RL1100 before hooking it to the Mark7 auto Drive ?
-
Do you have a link to where you ordered this ? Can’t find it anywhere on their site...
Thanks
-
Just a little food for thought you can order the Mark7 now without the powder drop and the case feeder which brings their cost down quite a bit along with their shipping cost and you could also sell your Dillon XL750 without the case feeder and without the powder drop, which brings your shipping cost way down and sell the XL750 without the case feeder and powder drop use those two on your new Mark7 and you’ll get the best of both worlds just my two cents...
-
One bad ass set up!!!
-
3 hours ago, MikeyScuba said:
Where did you get the light kit?
I’m pretty sure here.
https://reloadinginnovations.com/collections/featured-reloading-products/products/starlight-press-lighting-system-for-mark-7-evolution-revolution -
I had the Dillon 1050’s and 650’s now the Mark7 and couldn’t go back! The one nice thing is you can buy it strip down and add components that you already have.
-
10 hours ago, hiflyer51 said:
tmz, what did you use in place of the case feeder tube? It looks like some kind of flexible hose connected to a shorten case feeder tube. And what kind of connectors? I want to do this with my 750.
All the fittings and everything was from Mark7 but I did order the extension spring tube from McMaster card which you can see there if you look at the other thread it gives you the order number and everything thanks
EVO production stop
in non-Dillon Reloading Equipment
Posted
Zooming in on the picture off the website of the new Press it appears to be the same ? Do you have some additional info or a picture of the new one that you’re speaking of? Thanks Tony