harald

I got two bullet moulds from NEI 180gr GC, but have not found any gas checks in .401. The closest is .375 and .416. I have tried .416 GC but they are a bit "loose", and not easy to put on bullets. Does anybody else then Lyman and Hornady make gas checks? And GC for .401 bullets?

I am selling one of my 870 Express barrels. Will this barrel fit in a 870 super magnum? A potential buyer wants to know.. Thanks

Lee Bullet Mold 401-175-TC & 4.0gr vv 310 Gives me a PF of 174 in my 5" Edge

Thanks to everyone You are fast with answers, and can really help me This is a super forum!!

Shilen does not say anything about muzzle velocety on their web site: http://www.shilen.com/calibersAndTwists.html just low velocety...?

This revolver is for a Norwegian national competition, where there is a minimum power factor of 190. The 158gr bullet must have a faster muzzle velocety then 1210 f/s and a 180gr bullet must have muzzle velocety over 1060 f/s. Will these bullets be stabilized in these muzzle velocities out to 100 yards? I will shoot cast bullets, not jacked bullets.

Will a barrel with rifle twist 1-18 be a good barrel for heavy barrels like 158 - 180gr in 357 magnum? Or is this barrel twist better with lighter bullets? Hope You understand my Norwenglish

Where can I find tools to chamber my barrel in 9x25? My Nowlin barrel do not fit my full resized brass in 9x25. My dies are from Redding, but the chamber in my 1911 do not fit the brass...

Hallo, I am loooking for a 1911/2011 gunsmith with a export license. Does anyone have tips about this. I am living in Norway and is hoping to find one. Is it hard/expencive to get a export license in USA? It is expencive to export a gun by export companies, and takes a lot of time & money

A bit off topic maybe but can my 1911 slide with a Novak rearsight be recut to a Bomar cut without any welding? Or do my gunsmith have to weld up the Novak cut first, and then make a Bomar cut?

I am back with new scale and more questions I sent the Frankford back to Midway and got a Lyman 1000XP compact in return. But when I turn the scale off, the disply shows "-----" not blank....is this normal? I thought the disply should be emty when I turn it off

Thank you, G-ManBart Can I use reloading data for 180 gr jacked bullets when reloading my 170 gr lead bullets? I cast hard bullets from mono type lead from a print shop. There is not mutch data to find for vv power and lead bullets 170 - 180 gr with higher power factor. I have found a lot of data in 40 s&w but I am not shure if I can use the same power charge in 10mm. Harald

I know Nowlin made a comped barrel shroud for K/L frames I have one somewhere in my reloading room

I have just got a S&W 610 and want to reload with a higher power factor then 170. I have got my own cast cullets; Lee 170 grains TC bullets, and all vv powers 340, 350, 105, 3N37 and 3N38. Can I reload to a higher power factor then 190 with this bullet? Any tips...

Sgtsvi do you have moore pictures of this cool gun??? I want one too

New batteries, but same result I will call Midway first, and try to get a refund on this scale and buy a different brand

I have removed the batteries and calibrated the scale four times without any help. I will try new batteries later to day

I bought a Frankford Arsenal Micro scale from Midway a month ago. The first week I had no problems with it, but now I have problems calibrating it. When I try to calibrate it the scale showes "CAL E" everytime which says the calibration has failed. I have tried to calibrate it over 15 times, and everytime it failes. Is this scale just a cheap peace of s****, or are there something I have missed? Should I send it back, or buy a different scale?

9mm minor - 310 4os&w - 310 38SC - 3N38 38 special - 310 45acp - 310 357mag - 350 10mm - 3N37 44mag - 350 223 - N135 It is hard to find other powders in my country

Can a aluminum frame be hardchromed?

Do not rush it, take your time and do as the doctor sayes. I had the surgery in my shooting/strong arm two years ago, started too fast and hard and got chronic tennis elbow. Now I can not shoot as mutch as I want to

I made a trade and got a Para-Ordnance frame. The frame is very light almost like alu. The marking on the box say; Model 13+1, caliber .45, serial no. PG 002584 Have P.O. made alu frames before, I could not find any info on their web site. I have a 6" Caspian slide I was planning to put on this frame, will this be a good idea?

Thank you tightloop I did not think there was other options then Brownells and Midway E-mail sent to Shilen, they are my favorite

I have a S&W 610 with a 4" barrel and want to put on a longer barrel to use it as a target gun, but I can not find anyone who makes such barrels in the Brownells catalog. Any tips where I can get a barrel blank or a longer barrel to put on my revolver? I hoped to have my gunsmith put on a heavy barrel

I have two conversion from Marvel, I use them in my 1911 frames and 2011 frames without problems very accurat. Just have to remeber to use the right magazine I am very satiesfied with my Marvels