-
Posts
3,814 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by RePete
-
-
The one vest that's legal and should be because you would not wear that as a CCW concealment garment, is the Armadillo vest.
From the first time I saw one, they are too hot, too stiff, take off and they will stand on their own. CompTac now own them.
-
I run 137/138 PF (9mm) and 170/175 (40S&W and 45ACP) all year round and have never failed chrono anywhere I have been.
-
I think that my way is easier because I'll be changing primer sizes too.
-
This is what I used for15 or so years and print them on 2x4 Avery Labels.
-
I use a piece of 0.010" brass shim stock, loosen the bolts, slide the shim between the filler and primer slide, bend the excess on both ends of the shim up, have a tray ( I use a Speer/Sierra bullet box) to catch the primers ready, remove the bolts and lift into the tray/box.
Been doing it this way for 13 years.
-
I just ordered a set of BT 2.0's and will have them in 10 days.
-
On 5/21/2021 at 11:17 PM, AzShooter said:
I use the Power Custom Firing Pin as well and I forget who makes the moons but they were only $.25 each. TK moons are tighter but since the cheap ones work I stayed with them.
Sounds like the clips you used were from California Competition. They were the ones I used and never had a problem with them.
-
Why not contact Starline and tell them the issue.
-
Warren, I sent you the drawings I made from my clip saver and, I believe, the instructions too 5 years ago.
-
2 hours ago, CocoBolo said:
TexasTactical.org puts on a couple of IDPA matches every month in Bulverde. You could probably make a weekend out of it with IDPA on Saturday and Steel Challenge or Sunday, or USPSA.
Those matches are rum by Iron Mike and he's a great guy.
-
-
1 hour ago, pskys2 said:
Unfortunately for those "others" it's a personal issue, as it is with all of us. I'd bet we both would have more fun shooting anything than some of the naysayers shooting their preferred blaster!
Many times Happiness is just a state of mind and one has some control over it.
I agree, and us wheelies have range fun together one way or the other.
-
14 hours ago, pskys2 said:
The "ONLY" math worth knowing! Revolver's x Use = MAJOR FUN!
I always say "I'm having more fun shooting a revolver than you are shooting an auto!"
My saying is free to use at your will.
-
Look here.
IDPA.com and on your downloads tab, scroll down until you see Uploading results to IDPA and Results Upload Template
-
To help with powder measure accuracy, do what I did, attach a vibrator to the measure. Mine is an aquarium compressor.
The picture is on page 11.
https://www.uniquetek.com/store/696296/uploaded/26_Tips_for_Powder_Measure_Accuracy.pdf
-
On 4/8/2021 at 3:15 AM, Silverscooby27 said:
MBX 140 mm steel mags
On 4/9/2021 at 8:48 PM, Silverscooby27 said:Yes they just released 140mm mags for .40! I have 4 of them, they are great.
On 4/8/2021 at 3:15 AM, Silverscooby27 said:Make sure that you replace the mag release to a metal one because you will wear out the plastic one.
-
Give Dave Dawson a call and see what his take is.
-
-
No zombies just a normal amount for me.
-
This is my fix. Thin flexible plastic sheeting from a ring binder divider and 2 paperclips.
-
KISS bulletfeeder (the forerunner to the MBF) here for 13 years without problems in 9mm, 40 cal, 38 and 45.
-
For storage at home. Ammo in factory boxes, in a cabinet.
Load mags before leaving home for a match and then boxes as necessary in the shooting bag.
-
As Jim says, the fired primers are the problem. I solved it (mostly) by putting a 2" x 2" post it note on the front part of the press, extending to the left of the opening.
-
When I loaded N320 it was:-
180gr Frontier Plated CMJ
4.6gr/N320
PF 168
I was down loading the round.
What magwel for a G35
in Glock
Posted
To be quite honest, I've never seen the need for a mag well on a Glock. The opening is large enough and I have never missed the hole.