[SPS Vista 9mm Mags]

2 minutes ago, mro111lland said:

I have a Vista short also great gun factory mags are hit and miss I run old style sti mags with spacers and grams springs followers and base pads. I tried 2 mbx mags but kept having a really weird feeding issue with them. I think it's because the feed lips are shorter on the mbx mags then sti mags don't think the wrong was being controlled long enough to make it under the extractor mbx was happy to take them back have not tried the new sti mags yet

I may just order SPS factory mags for now. 

Did you make any changes to the gun?

[SPS Vista 9mm Mags]

I have a new SPS Vista Short chambered in 9mm on the way. I need to order magazines. I need advice on whether to stay with the SPS factory mags or go with the new STI mags.

[Factory SP-01 Bushing life]

You can measure the od of the and the id of the bushing and determine how much clearance you have. CGW or CZ Customs can verify whether you have excessive wear based on these numbers. 

[Visual acuity and focus, training recommendations.....]

I just made the switch to open in 3 gun competition and have mastered moving letting the dot come to the target with my shotgun. I am doing drills with my pistol and practicing with the dot off seems to help. I had a battery go out on my pistol during a stage a few weeks ago and was still hitting steel at 15 yds looking thru the glass. I don't recommend this but I realized then that I could move the gun not the dot.

[Vepr 12 mag pouches]

I like the ones from Dissident Arms. They stay in place and are to easy to pull from your belt. 

[Bul Armory?]

Not using STI type mags is a deal breaker for me. 

[Lynx 12 Open Build]

Finished the build and shot 3 matches so far. Total round now is 1k. It is completely reliable with AA 1200 fps shells and the accuracy with slugs is better than any shotgun I have owned. 

I have about $1300 in the gun and 3 mags. Still need to get at least one 20 rd mag. 

[Bul Armory?]

I handled and shot one of these and it seems to be a high quality gun. 

[Which is your favorite CZ and why?]

I really enjoy my Shadow Target from CZ Custom. It's way more gun than I am shooter. 

[RIA VR80 coming in 2019]

I wonder if the mags from Tooth and Nail will work with these shotguns

 

[Lynx 12 Open Build]

I bought a Lynx 12 to set up for an open class shotgun. Anyone have any experience with one of these Saiga clones. It cycles AA 1145's out of the box. 

[Magwell for ATI PCC]

12 hours ago, jlo86cj said:

I'm pretty sure the ATI lower is a New Frontier, so anyone available for it should work.

Thanks

[Magwell for ATI PCC]

Does anyone make a magwell for the ATI 9mm carbine. I bought one a couple of weeks back and need a magwell for it. 

[Stoeger M3000 Scattergun?]

My M3K finally had an issue during a match yeaterday. The inertia spring broke causing FTE.  I guess I should change springs every 5000 rounds or so.

[CZ 75 SP-01 TACTICAL]

Here's my shadow target done by CZ Customs and my SP01 with CJW parts. I shoot them the same on the clock

[Starting with a CZ75B and then what...]

25 minutes ago, lfine said:

I contacted him - looks like the SP-01 deal is gone. All he seems to find up here in Ohio is sp-01 tacticals starting at $575-600- which I advised against because of decocker, agreed?

Yes 

[Starting with a CZ75B and then what...]

Get the SP-01 and a production kit from Cajun Gun Works. I have one and really enjoy it. 

[SP-01 Reliability Test]

1 hour ago, 858 said:

Reliability for what? There's a disparity between an area match and an ad hauc steel match. A local steel match is a good place to show up with your pet project, an area match not so much.

Reliability for local matches. I would switch out the 8.5 for an 11lb if I were going to a area match or a regional 3gun match. 

[SP-01 Reliability Test]

1 hour ago, adamge said:

2000

That's kinda what I was thinking.

[SP-01 Reliability Test]

I installed the extended firing pin and reduced power spring along with polishing it to a mirror finish.

[SP-01 Reliability Test]

I put together a back up for my Shadow Target Custom production gun using a SP-01 as a base. 

I installed the complete CGW production legal kit along with a 8.5 lb hammer spring. The trigger is great and the gun sets off Winchester primers without any failures on the first 150 rounds. 

How many rounds do most people consider acceptable for verifying reliability? 

[Accu Shadow or Shadow 2]

On 8/1/2017 at 7:55 PM, Weever82 said:

 

I don't care that it's cooler but that it fit me like italian leather seats instead of my Honda clown car cloth seats. Maybe cause I have smaller hands but I could grip higher and gun felt more stable than the Glock. I could reach the trigger and mag release easier also. Never thought it would be that big of a "WOW" difference holding it but it was night and day.

 

Ever send any CZ's to Angus at CZ Custom? I hear alot about them and they are like 5 minutes from my work.

 

Thanks for the input

I have a Shadow custom by CZC and the gun is amazing. 

[Rock Island Hi Cap pistols]

9 hours ago, usmc90 said:

Glad I a have 6 of those mag extensions that don’t work.  Also have the Taylor Freelance fatty magwell that doesn’t work with any of it either.  Ugh

If you decide to get rid if the topless Dawson basepads let me know. 

[Rock Island Hi Cap pistols]

18 hours ago, usmc90 said:

Which Dawson extensions are you using ?  I bought several of their “toolless” and they won’t seat due to magwell clearance. 

I increased the opening on my magwell to eliminate the interference issue. 

[Rock Island Hi Cap pistols]

My MG mags hold 21 reloadable with Dawson extensions and I have at least 10k rounds thru them. I use grams followers and springs. I also have an Arrendondo extension on one if my mags and don't have any issues with it. It holds 20 reloadable. I use my gun for 3gun matches.