hump
-
Posts
224 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by hump
-
-
9 hours ago, vgdvc said:
Does anyone know if the SPS Vista grip/ mainspring housing is interchangable with a STI plastic grip and 2011msh?
I installed a STI grip with no problem
-
I put a STI grip on mine with very minor fitting. The barrel is 5 in.
-
Have you tried the rounds in other open guns?
-
I went with the 510c on an Atlas mount. Will shoot it later this week but I can already tell I really like it.
-
Just mounted a 501c on an Atlas mount. Will get to the range for some practice later this week and will update.
Looking thru the 510c is like watching a 75" TV in a small room
-
PM sent
-
7 hours ago, mrsig03 said:
Holosun 510c weight without QD but with shroud. Hope this helps.
Sent from my iPhone using TapatalkThanks. I was leaning towards the 510c due to the size of the glass. I will go ahead and get an Atlas mount on the way.
-
5 minutes ago, kujo929 said:
Pull off the outer shroud and QD mount from the 510C and there is no weight issue.
Sent from my iPhone using TapatalkIs the optic still robust to allow dumping into buckets for 3gun matches?
-
I am currently running a 507c on my CO gun and really like the clarity of the dot. It is very easy to pick up. I have a Atibal MRD v2 on my open pistol and have considered buying a 510c for my open pistol. I have noticed several for sale in the classified with a mount and have to wonder if the weight is an issue. I would just change the 507c over to the open gun but I will need to buy another mount and don't want to end up with an extra mount if the 507 is to small for the open pistol.
-
I have been thinking aboit trying a 507 on my open pistol. I really like it on my CO pistol. Does the size of the glass slow you down.
-
6 hours ago, vgdvc said:
Thanks for the response. Are you shooting 38 super/ super comp or 9mm? If super or super comp would you mind sharing your load data? Thanks
I am shooting 9mm.
-
I use the Major Pistol with good results. Much cleaner than AA7. I also use the Auto Pistol for major of. It is very similar to HS6
-
Has anybody else polished the feed ramp on the receiver? I polished mine to a mirror finish and it hand cycles amazingly smooth. The shells almost jump into the barrel. Haven't been to the range yet but it sure feels much smoother.
-
How effective is the comp when shooting 1145fps ammo. I can't tell much difference. I am going to drill 3 holes in the top of the comp to see what that does but I am thinking I will just leave it off. The pattern is much better without it also.
-
-
36 minutes ago, Firebull said:
Glove on left hand.
Me too
-
37 minutes ago, IntenseImage said:
Jump to 8:40 ... It's about the grab
Sent from my SM-G975U using Tapatalk
Yes shells down
-
11 hours ago, WWG1WGA said:
I thought the spring looked the same either way...s#!t. I’ll pull a new one apart again. By backwards are you talking end for end or rotated and facing the wrong way? Thanks
Rotated facing the wrong way.
-
2 hours ago, IntenseImage said:
I'd think w the weight and friction of a 12g stack you would want as much ass being the spring as possible. Sure the basepads I just added removed some of that spring pressure but I haven't run them yet to see how they are doing and if spring fatigue issues will show up sooner than without
Sent from my SM-G975U using Tapatalk
The RIA mag springs are a LOT stronger than the springs in my 12 and 20rd mags for my Lynx shotgun. I have wondered why they need to be so strong. I did find out during a match on Sat that installing a spring backwards in a 10rds mag will cause misfeeds.
-
Mine is set up pretty much the same except I am running the factory buffer and spring. I polished the trigger and changed the trigger spring and improved the trigger a lot.
-
20 hours ago, busdriver said:
Mine would occasionally hang up like that. I sanded off the anodizing and polished the feed ramp in the lower receiver. This seems to have fixed it.
Might check the extractor notch in the barrel. Mine was very sharp and would cut the plastic near the end of the shell. Where it folds over to form the crimp. I don’t think it was causing the malfunction, but i “smoothed” it up anyway.
finally, I noticed it seems to run best with lots of oil.
I think I found my problem. The forward legs on the bolt carrier were rubbing the magazine. I measured the carrier legs and found the very front of the leg was .038 narrower than the rear section. I adjusted this and it is now much smoother. I won't get to test it before the match on Saturday but it feels "right" now.
-
2 hours ago, WWG1WGA said:
Is it all rounds in the mag or just the first? Or are you leaving rounds in the mag for any amount of time before you try this...say couple hours or anything where the first round gets distorted? I’ve found some odd things about this gun when not firing it but it seems like it runs fine under live fire
Most of the first 8-10 rounds. They were loaded in the mag just before I cycled it.
-
44 minutes ago, IntenseImage said:
Sent from my SM-G975U using Tapatalk
Do they increase capacity
-
39 minutes ago, IntenseImage said:
Does it work under firing conditions ... If so, who cares
Sent from my SM-G975U using Tapatalk
I agree. I just thought it was odd.
sps vista
in Open Pistols
Posted
I am still running the factory ignition parts. 2 1/2 lbs and dependable