hump
-
Posts
224 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by hump
-
-
I have been running a Hybrid contour for the lase 2 seasons and it's more accurate than I am. Shoots MOA to 300 yds easily.
-
Dissident Arms can install one of their magwell and offer other upgrades. Great guys and products.
-
I loaded some with Power Pistol with good results. I prefer JHP but the Brass Monkey 124gr worked fine in my SPS Vista.
-
I run a 15lb commander length on both of mine. The 14 worked but I occasionally had a light strike. The 13 did not always go completely into battery. My ammo is loaded to 130pf.
-
I run the Sig P320 guide rod with a 14lb Commander spring in both of mine. Freedomsmith triggers and Holosun 507 optics
-
WSF should be very soft shooting. I use Shooters World Auto Pistol for mine. 5.4 grs gets my about 132 pf.
-
If you decide to offload them I'll take them
-
I bought 2 Canik TP9SFX's and added the Freedomsmith triggers and really enjoy shooting them. I was shooting aCZ Shadow 1 and don't miss the weight difference at all. The Canik is as accurate as the CZ. The trigger on my Canik breaks at 2.4lbs with a very short reset. I an running a Holosun 507 optic.
-
I shoot a CZ Shadow Target and load with several different powders. My normal OAL is 1.06. I have never had any problems with over pressure. I admit they look to short but they function as they should.
-
8 hours ago, Rasmilling said:
How many rounds have you got trough it?8-10k rounds.
-
1 hour ago, Chillywig said:
I checked out the web page for info on the SPS. Says it has life time service contract for the original owner. That sounds good! It also say uses ammo 160+PF so might what to confirm it would work with a different recoil spring for minor ammo
I run the same spring in my SPS for 170pf and 135pf ammo. The ejection is weaker but function is 100%. I use a 9lb spring.
-
I have been running a Vista Short with both major and minor loads for more than a year. I changed the extractor, ejector and firing pin and have shot 8-10k rounds with very few issues. I ran some 130pf loads thru it today to check POI before a 3 gun match this weekend. When I shoot USPSA I run 170pf JHP's. The gun is still very tight and smooth. I put a Holosun 510C with an Atlas mount and it has been rock solid.
-
It looks the same to me. I run mine without a shield
-
19 hours ago, tanfoglio1911 said:
Does atlas mount cover the whole body of the holosun? Do you have a picture of it?
Sent from my SM-N950U using Tapatalk
-
I use the Atlas mount
-
I use adjustable sights and do a bench zero at 12 yds
-
I had this issue until I installed an extended firing pin. I thought the gun came with one installed but I was wrong.
-
15 hours ago, Underwood said:
mine are about that
.135
no noticable difference in felt recoil just runs damn near anything i feed it..
its runs the 1oz stuff and Walmart federals all day long..
I agree. If your worried about recoil you don't need a 12ga shotgun. A gas operated shotgun doesn't have a lot of recoil to start with.
-
My CZ has a 5.4 lb double action and a 2.1lb single action. The trigger was done by CZ Custom.
-
I just switched from a Shadow 1 to a Canik for CO and my times are better doing drills I use to measure my performance. The double action first shot caused me issues with the CZ.
I did replace the trigger and some springs on the Canik to get the trigger to 2.4 lbs.
-
20 yards
Quote -
Shooting an open class shotgun I a hoot too. With 20 plus rounds of 12ga and a dot you usually have a big grin on your face.
-
Not sure about the accuracy of the Sig but I just returned from sighting in a new Canik TP9FSx and it as accurate as my CZ SP01 Shadow Target Custom. I shot them both side by side at 20yds and the groups were under 2" offhand with 124gr HP reloads at 130pf.
-
When I shot tac ops I went with the M3K Stoeger and never had any issues. I opened the loading port for quad loading, installed a Bennelli extractor and spring and did a trigger job on it.
Different bullet weights/same match
in Rifle - Technical
Posted
I do this all the time. 55gr inside 200 and 72 gr eld-m past that. I zero with the 200 gr at 200 yds.
I just shot a DMR match out to 500yds using 55 gr ammo and had no issues hitting 2 moa targets. I prefer the 72 gr eld-m bullets but didn't have enough loaded for this match.