ysrracer

Thanks guys, I ordered 1000.

I can't find it anywhere. Thanks in advance.

Name: .38 Short Colt: 160gr Bayou RN: Titegroup 3.0gr Notes: S&W 627 5" Shots: 8 Average: 769 ft/s SD: 10 ft/s Min: 756 ft/s Max: 784 ft/s Spread: 28 ft/s Power Factor Average: 123 Power Factor Low: 120 Power Factor High: 125 Weight: 160.0 gr. Primer: Fed SSP Case: Star Line C.O.A.L.: 1.15 Powder: Titegroup 3.0gr Bullet: Bayou 160gr RN

I'm not sure yet. When I'm running and gunning, it's not the load that's keeping me from hitting all A's

Name: .38 Short Colt: 160gr Bayou RN: Titegroup 3.2gr Notes: S&W 627 5" barrel 1.15 oal Federal primer Star Line case Titegroup 3.2gr Shots: 16 Average: 841 ft/s SD: 11 ft/s Min: 823 ft/s Max: 863 ft/s Spread: 40 ft/s Power Factor Average: 134 Power Factor Low: 131 Power Factor High: 138 Weight: 160.0 gr.

When I goofed on the guys on calguns.com for their 29 step brass cleaning process they weren't happy. Here's my three step process 1. Dump in the brass 2. Tumble the brass 3. Dump out the brass No pins, no goop, no pre de-priming, no food dehydrator, no....

Here's my chrono report. Note, I was firing it thru a five inch S&W revolver. Name: 9mm: 124gr Xtreme RN, Win 231, 4.3gr, Win Case Notes: S&W 929 5" barrel Shots: 30 Average: 950 ft/s SD: 17 ft/s Min: 928 ft/s Max: 989 ft/s Spread: 61 ft/s Power Factor Average: 117 Power Factor Low: 115 Power Factor High: 122 Weight: 124.0 gr. Powder: Win 231 4.3gr Case: Win Primer: Fed SPP Bullet: Extreme 124gr RN

There used to be a shop in town that rented me time on this...

You say that likes it's a bad thing.

Works great with Bayou bullets.

I know this is an old topic. But what oal should I be using with 160gr RN Bayou bullet? Same question with a 158gr RN Berry's Bullet?

I just registered, anybody else?

I'm going to shoot these thru a S&W 929 9mm revolver, so I always need an extra grain or two.

Sorry, I actually have 124gr Xtreme plated bullets. I loaded up a few with 4.3gr of 231. I'm chrono them on Wednesday and report back.

Yep,I just did a few yesterday. No issues.

Can you post a picture? Please?

In a Glock, sorry.

Titegroup, Clays, 231, AA#5, and Win WST. Which one do you guys like for a 115 FMJ to make minor? Any pet loads?

Sorry, missed that part. My head is still spinning from how well the Mini bullet feeder works

You mean one with a motor? Because this one was a 100 bucks.

Good point, I'm using plated bullets, Berry's/Xtreme. I'll try it with Bayou and report back.

Can I just loctite it in place?

I bought it a week ago, I should have bought it ten years ago. Set-up and adjustment was maybe five minutes. I bought two extra magazines, and load them while I'm watching TV. The thru-put is so fast, I'm amazed when it's out of bullets already.

My 929 head spaces on the moon clip. It won't fire with out it.