bigstick0000

i keep track on my open gun by bullets ordered only. limited gun is tracked by log book only-both work

can anyone tell me what causes breach face erosion? what is the end result of this? shooting 38 super comp. thanks

thanks for the info

i usuallyu load 180 gr bullets for my svi with universal clays-4.9 grs. I was given 2000 bullets of 155 gr, round nose, does anyone have a weight for universal clays with 155 gr bullet? Just for plinking, thank you.

i don't know how to tell, which one should I be using? thanks

Would using pistol primers eliminate the problem? Im using new starline brass also

I have started shooting a brazos race gun (awesome gun) and have been using SR4756-8.3 gr with zero bullets. I am usingWSR primers and am experiencing failure to ignite of about 1 out of 20 primers. It appears that the firing pin is striking the primers fairly decent. I fire them a second time and they always ignite. Anyone help me with a possible solution? thanks

I have found several blast shields for my open c-more. Any preference or are they all about the same? thanks for your help again

I sent off for paperwork on my cmore, not here yet. I need tomove my dot 1 inch right and 1 inch up, how do i adjust it? thanks

i just started loading .38 super comp, 8.2 gr of imr 4756. it almost fills the casing completely, is this what they call a compressed load? thanks

i read somewhere last year that some people run unto this if they tumble there bullets after loading them to clean them. The article stated certain powders have a coating on them and the vibrations can actually wear the coating down on the powder which can create additional sparks.

thanks for the tips, very helpful

appreciate the info. thanks

when shooting and working a load up to make sure the comp is working at its best-how do you knowwhen it is at its best?

I just set upa dillon pressin .38 super for my recently acquired brazos open. I am using zero bullet, 124 gr-fmj, with imr 4756, starting at 8.2 grains. What oal would you recommend, i am thinking around 1.240 any other tips appreciated. thanks

I have an open gun just bought from a friend and have 3 boxes of x-treme 9mm copper plated bullets. Does anyone know if these will fire through a .38 super gun okay? I have montana gold on the way but wanted to use these up first. thanks, lot of knowledge on this sight, impressive.

harbor freight small cement mixer on sale for $99.00, holds tons of brass, industrial strength motor, using it for a couple of years now, works great.

I have purchased a brazos bcg pro series in .38 super comp from a friend and I am told to start with about 8.2 gr IMR 4756. Loading so much powder creates a lot of pressure,how can that be safe to shoot? thanks

harbor freight, small cement mixer on sell for $99.00., 3 years and going strong, cleans thousands