-
Posts
696 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by midvalleyshooter
-
-
I think a link to this belongs here. Check it out.
CZ action timing---> http://www.calguns.net/calgunforum/showthread.php?t=1101895
-
I think once you add an optic the barrel length is less relevant. IMO the real sleepers in this division will be pistols like the P-01 set up like a full on comp ready Shadow but with a red dot.
-
What is your budget?Does anyone have a list of things to order to complete the makeover of a SP01?
I went back and looked at what Prof. Atlas used at the beginning of this thread.
CZC:
Race hammer
Shadow mag release
97b trigger
Flat hammer spring plug
CGW:
Ext. firing pin
Ext. FP spring
FPB spring
11.5 hammer spring
Trigger return spring
Type 1 short reset disconnector (why type 1 and not type 2?)
Is that about it? I would like some improved sights. How about the CGW floating trigger pin? How about small easy to lose parts? Should I get a spare hammer spring strut and pins to make disassembly easier in case I need to fit the disconnector?
Thanks in advance,
Keith
-
Does anyone have a list of things to order to complete the makeover of a SP01?
-
Just found this, be nice to have a slo mo close up of the disconnector:
-
Joe L has some good disassembly videos on Youtube here--> https://www.youtube.com/channel/UCOmYvezDf5LbmXn9IDQhjqw
-
Thanks. I came across that thread, but after the trigger bar he never finished lol.Check this out: http://www.czfirearms.us/index.php?topic=66147
I think it is a work in progress of a very busy guy.
-
Check this out: http://www.czfirearms.us/index.php?topic=66147
-
My "transitional" pre b is stamped on the right side of the slide by the extractor, I believe. Just dropped it off to be refinished or I'd go check for you.
That is it, just above the ejector is a two digit date code. Mine is marked 94.
-
I took out the fiber rod and looked at it with a strong light and my jeweler magnifier. I'm not sure if there is a set screw or not. If there is it is a size smaller than I have.
-
I took my trio of CZ's to the range today. The Accu Shadow was its usual boringly accurate, reliable self. The P09 and CZ85 ran without a hitch.
Hey but wait a minute! The front sight is falling off the P09? I got the pistol with these sights on it. Can anyone help me ID the sight and tell me how the front sight is held on?
-
-
Here is a link to what hard chroming looks like. Not my guns, but very nice none the less:
http://www.calguns.net/calgunforum/showpost.php?p=16491509&postcount=59
-
-
-
Welcome,
I have not had a 650. I did have a 550 and I have owned an rl1050 for 20 years. My advice would be to get the 650. That is what I would get if I was starting over.
The 550 is a nice press, but the manual indexing is tedious. I think as far as converting calibers the 550 and 650 are similar. Both are easy to switch.
-
-
-
You could add the HAJO rear adjustable sight. I would check with CZ Custom to insure it would solve your issue. I am assuming IPSC allows rear sight replacement.
Here is the link--> http://czcustom.com/czshadowtacrearhajo.aspx
-
Where is the go to website(s) for parts and upgrades?
Here are a couple links to help:
http://www.brianenos.com/forums/index.php?showtopic=191773&hl=
http://www.olegnikitin.com/news/complete-disassembly-assembly-of-cz-75-sp-01-shadow
I would suggest one of the CZ's without the firing pin block. They are easier to work on. Your choices are a Shadow, CZ85 or a Pre b version CZ75. This last link is for the disassembly of a Shadow. If you have a FPB the firing pin is retained with a roll pin rather than coming apart like a 1911. The sear cage has an extra spring and lever which make it kind of a pain.
-
Thats extended. Should be about 2.500.
Shadow ext fp, is longer than 75b ext. Fp
Ah, ok, thanks:)
-
My google fu found this:
http://www.czfirearms.us/index.php?topic=34419.0
I need to check my calipers!
-
I saw this thread:
http://www.brianenos.com/forums/index.php?showtopic=139857
I'm thinking my calipers are off?
-
2012 build
should be action job with CZ comp hammer, 13# main, 11# recoil, SS guide rod
LPA style adjustable rear sight, .125 wide front with 1mm FO rod. Some models had wood grips, then build went to aluminum grips.
may or may not be ext firing pin.
if you take it out. and its kind of grey color with a flat running the length. its factory.
Here is a picture of the firing pin. It is blued, no flat and is slightly longer than 2.5". Is that a stock type or extended?
A little humor goes a long way
in Humor
Posted
http://www.highbridgearms.com/english.htm