Search the Community
Showing results for tags 'glock 17'.
Found 5 results
-
Before I post all of the load data (there's a lot of it) I do have a question for those that are more experienced with e3 than I am. What would you consider the max charge for a 115g plated bullet? I'm looking to make 130 - 135 Power Factor to use for a steel challenge open minor gun. The gun is a Gen 4 Glock 17 with KKM barrel and Carver 2-port comp. (Yes I know we don't have a power factor in steel challenge but I still want to make minor for USPSA matches) (Yes #2 - I did search before asking the above question). Here's the chrono results from today. All runs where done with Gen 4 Glock 17, stock barrel. Chrono approximately 10 feet down range. 10-shot strings where used for each run. Mixed brass and e3 used for all of my loads. Today I only tested to see if the load would make minor power factor. Once I have loads that will I'll do group testing. Baseline - Winchester White Box 117g Target Ammo Avg Velocity - 1194.5 Std Dev - 19.7 ES - 66 Avg PF - 137 Bayou 95g with 4.1g @ 1.060 Avg Velocity - 1228.8 Std Dev - 22.9 ES - 77 Avg PF - 116 I knew this wouldn't make minor but I had them loaded so I figured I would test them. These next runs are just tests I did because I had the ammo loaded and on hand. Blue Bullets 115 with 3.5g @ 1.135 Avg Velocity - 1080.5 Std Dev - 9.2 ES - 31 Avg PF - 124 Blue Bullets 125 with 3.5g @ 1.135 Avg Velocity - 1068.2 Std Dev - 15.1 ES - 41 Avg PF - 133 Blue Bullets 147 with 3.0g @ 1.130 Avg Velocity - 923.1 Std Dev - 14 ES - 52 Avg PF - 135 Bayou 135 with 3.5g @ 1.125 Avg Velocity - 1005 Std Dev - 14.7 ES - 48 Avg PF - 135 For the next 3 runs I used Xtreme 115g Xtreme 115 with 3.8g @ 1.135 Avg Velocity - 1037.2 Std Dev - 13.7 ES - 39 Avg PF - 119 Xtreme 115 with 3.9g @ 1.135 Avg Velocity - 1047.1 Std Dev - 11.3 ES - 38 Avg PF - 120 Xtreme 115 with 4.0g @ 1.135 Avg Velocity - 1037.1 Std Dev - 10.2 ES - 35 Avg PF - 123 (it was interesting to see how the numbers closed up as the powder charge increased) My next experiment was to use Xtreme 115 with 4.0g but vary the OAL. 1.140 Avg Velocity - 1076.3 Std Dev - 11.2 ES - 36 Avg PF - 123 1.145 Avg Velocity - 1068.2 Std Dev - 14.2 ES - 39 Avg PF - 122 1.150 Avg Velocity - 1063.9 Std Dev - 12.6 ES - 47 Avg PF - 122 1.155 Avg Velocity - 1066.5 Std Dev - 12.4 ES - 42 Avg PF - 122 Next I moved on to Xtreme 124 and worked up loads from 3.5 to 4.0. OAL was 1.135 for all loads. 3.5g Avg Velocity - 975.2 Std Dev - 10.5 ES - 33 Avg PF - 120 3.6g Avg Velocity - 989.8 Std Dev - 13.1 ES - 33 Avg PF - 122 3.7g Avg Velocity - 1008.8 Std Dev - 9.2 ES - 28 Avg PF - 125 3.8g Avg Velocity - 1013.9 Std Dev - 10.1 ES - 33 Avg PF - 128 3.9g Avg Velocity - 1033.1 Std Dev - 11.4 ES - 31 Avg PF 128 *Every shot made minor 4.0g Avg Velocity - 1044.1 Std Dev - 8.2 ES - 27 Avg PF - 129 *Every shot made minor. This will be my new production load with the Xtreme 124 bullets.
-
Hello, Would someone know does gen 3 Glock 17 (or 34) equipped with Dawson Precision ICE magwell fit in to IPSC Standard box (225 x 150 x 45 mm)? G17/34 is 138 mm tall, so there's only 12 mm free space "under" the grip. Length won't be a problem with G17, but G34 is 222 mm long, so there's only 3 mm of free space.. Width won't be a problem. Dawson told me that ICE is 42 mm wide. For some reason Dawson hasn't provided me an answer to this question (how much ICE adds to the length and height of the gun). I've asked it from them couple of times, and they always send me a reply telling how much ICE weights
-
So I got a good deal a new Gen 3 G17L a couple weeks ago and decided to use it for fun in Limited Minor. The POI was high of POA using off the shelf 115gr even with the rear sight bottomed out. I worked up a few loads, chrono'd them, and settled on one. Threw in 13lb recoil and 5lb striker springs and went back to the range. Now I'm about 3-4 inches high at 10yds with the factory rear sight bottomed out. I'd planned on changing the sights anyway, but anyone have any ideas why the gun would be high even with factory ammo? I've never had the factory adjustable sights on a Glock before, is this common?
-
I have a Glock 17 im looking to shoot for open. I was wondering what all I need to change out for the Glock to handle 9 major for a extended period of time.
-
I'm looking for a load with 147gr bullet and VV320 (or similar speed) in a Glock 17. Bullets are coppered lead. Been looking but can't find a good starting reference.
