EAA Witness Stock Magazines

[Fast Shooter Wannabe]

I have an EAA Witness Stock in 10mm. ?The chrome bodies mag that came with it has no problem getting 15rounds in it, but the 3 that I got from the manufacturer are very difficult and will only get 12 rounds in them. Any suggestions?

Thanks,

Jason

[Ronemus]

I solved the problem with Grams followers and springs. The factory follower has legs that bind in the spring, effectively reducing magazine capacity. With the Grams, I have no problem fitting 16 rounds in the magazine.

[photog]

Factory rounds or reloads?

If reloads, you have to completely resize the case, including the rim, to get them to go up to capacity.

[olp73]

I have an EAA Witness Stock in 10mm. ?The chrome bodies mag that came with it has no problem getting 15rounds in it, but the 3 that I got from the manufacturer are very difficult and will only get 12 rounds in them. Any suggestions?

Thanks,

Jason

Cut 2/3 of the legs off the follower. If necessary bend the last coil of the spring so the follower/first round has the same angle as the feedlips. This should give to at least 16.

[Steveindajeep]

I have a 10mm match and had the same problem with a four of the mags I bought with it. I took mine apart and sprayed them with silicon. Then loaded them with ten rds and let them sit for a week. I was soon able to get 15rds in all 4 of mine.

I have an EAA Witness Stock in 10mm. ?The chrome bodies mag that came with it has no problem getting 15rounds in it, but the 3 that I got from the manufacturer are very difficult and will only get 12 rounds in them. Any suggestions?

Thanks,

Jason

Cut 2/3 of the legs off the follower. If necessary bend the last coil of the spring so the follower/first round has the same angle as the feedlips. This should give to at least 16.