Kyle O Posted October 21, 2008 Share Posted October 21, 2008 I can't find any data on this and was wondering if this is dangerous. I've ruled out clays, but a buddy had some n310 he loads under 147grs, his load is not published either, but it works good for him. thanks, kyle. Link to comment Share on other sites More sharing options...
kmitchl Posted October 21, 2008 Share Posted October 21, 2008 I load 147 gr 9mm with N310. It's the original bunny fart load. Low recoil, very clean, low report, minimal muzzle flash at night. N310 is really fast - faster than Bullseye. I don't recommend it to anyone who is not an experienced reloader. You must have a solid crimp. Bullet setback will result in overpressure. Link to comment Share on other sites More sharing options...
19852 Posted October 21, 2008 Share Posted October 21, 2008 I use N320 with a 124/125gr bullet. Never tried N310, it is just to fast, not worth the potential pressure problems for me. Ramshot Competition is good also. Link to comment Share on other sites More sharing options...
DougCarden Posted October 21, 2008 Share Posted October 21, 2008 Been there, done that ....wrong powder....you need to use 320 burn rate powder for any good long range accuracy over 15yrds..... My .02$..... Good luck, DougC Link to comment Share on other sites More sharing options...
Carlos Posted October 21, 2008 Share Posted October 21, 2008 -these results agree with what Angus (team CZ shooter) found with 124s: the N310 is great for recoil reduction, but it does not produce great accuracy. I think he settled on N320 as well. -the other Doug C. Been there, done that ....wrong powder....you need to use 320 burn rate powder for any good long range accuracy over 15yrds.....My .02$..... Good luck, DougC Link to comment Share on other sites More sharing options...
Kyle O Posted October 22, 2008 Author Share Posted October 22, 2008 Thats about what I thought, Thanks everyone. Strike 2 for me. I found some tightgroup, and some load data that gives me a starting point. Link to comment Share on other sites More sharing options...
ShaunH Posted October 22, 2008 Share Posted October 22, 2008 Tightgroup is damn dirty and it burns freaking hot (temp sensitive), but it's cheap. I had accuracy and feed issues with Tightgroup in my CZ. N320 resolved it. Tightgroup also fouled up the internals that were polished in my Glock making the trigger a bit harder. Link to comment Share on other sites More sharing options...
HighVelocity Posted October 22, 2008 Share Posted October 22, 2008 125gr moly on 3.5grs of Titegroup runs like a dream in my 9mm Singlestack and my G34. It's a little smoky but the accuracy is excellent. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now