dukhunt Posted April 19, 2008 Share Posted April 19, 2008 Hi fellow shooters, Have been doing a search on powders for shooting lead bullets for a while now. It seems everybody has there own idea about what shoots good for them. I am going back to shooting lead for local matches and practice, outdoors, bacause of the rising cost. I have a good supply of 180 gr lead , and a supply of powders, VV320, solo 1000, wst, and TG. Would any of these powders be ok for loading, or is there a perferred choice. I shoot a para, with a kkm heavy barrel, normaly loaded to 1.170 with precision bullets. I will chrono all loads suggested and post the results here for all to see , so that it might help the next guy or gal. Any data will be greaty appreciated. Any special receipe's to solve the delima will be grealy helpful. I am going for the 170 PF . Thanks to all. Link to comment Share on other sites More sharing options...
Paul Burtchell Posted April 19, 2008 Share Posted April 19, 2008 I think you will have less issues with smoke if you use N320. TiteGroup with lead or moly bullets tends to be pretty smokey. Link to comment Share on other sites More sharing options...
jasmap Posted April 19, 2008 Share Posted April 19, 2008 They'll all smoke but I use N320 and it appears to me to be less smoky. Link to comment Share on other sites More sharing options...
Seth Posted April 19, 2008 Share Posted April 19, 2008 Timely discussion. I am just starting on working up my .40 LTC load. Based on the advice here, I bought N320 and am looking for a good OAL and charge for Major. I'm going to start at 1.175 and 4.0gr and work up from there.... I'm also curious to see what Lead loads are out there. Seth Link to comment Share on other sites More sharing options...
ap38 Posted April 19, 2008 Share Posted April 19, 2008 N 320. Smokes less than TG, very consistent, not very temp sensitive. Can use it with 9mm, 40 and 45 loads. Pricey, but works very well. Link to comment Share on other sites More sharing options...
Seth Posted April 19, 2008 Share Posted April 19, 2008 What loads? Link to comment Share on other sites More sharing options...
Dave C Posted April 19, 2008 Share Posted April 19, 2008 (edited) WST, WST and WST. Did I say WST? Half the price of 320, a little temp sensitive, but nothing you can not deal with. I run 4.5 grains of WST over a 182 grain Cast Lead RN or TC. My Kart barreled Para can run 1.240 OAL, but it seems to like 1.150 OAL. I never get that "chunk" with the shorter OAL. I have tried alot of powders and IMO WST and 320 seem to smoke the least with cast bullets. American Select shoot great, as does Ramshot Competition. I read some good stuff about Solo 1000, but do not have any personal experience with it. Edited April 19, 2008 by Dave C Link to comment Share on other sites More sharing options...
North Posted April 20, 2008 Share Posted April 20, 2008 I'm using 4.05 grains of E3 under my 180 grain bear creek (semi-moly)SWC in my STI Edge. Not even close to the leading and gunk compared to titegroup. Link to comment Share on other sites More sharing options...
Tom S. Posted April 20, 2008 Share Posted April 20, 2008 (edited) When shooting lead, a lot of the smoke you see is from the bullet - specifically the lube. Besides experimenting with powder, experiment with the bullets too. The bullets I use are conventional lube (I'm not bothered by the smoke), but you might try some lubed with dry lube (moly or danzac?) and see how you like them. Edited April 20, 2008 by Tom S. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now