gcphw123 Posted March 12, 2008 Share Posted March 12, 2008 I am entering a shooting competition at a local shooting club that does bowling pin shooting once a month. Their "Major" class is bowling pins set up bowling pins 16 inches from the front of the table. They give you 15 seconds to clear 5 pins. Should I go with the extra capacity of a .40 S&W caliber or just go .with 45acp and let the pins fall. I'd appreciate your input since I've only shot paper until now. I would appreciate any help. I have a 9MM Match that is good for the "Minor" class and I am thinking of getting a larger caliber EAA Match for the "Major" class. Link to comment Share on other sites More sharing options...
Merlin Orr Posted March 12, 2008 Share Posted March 12, 2008 Go with the .40. Not because it's better now (although very good) but for the future. Welcome to the Forums! Link to comment Share on other sites More sharing options...
dirtypool40 Posted March 12, 2008 Share Posted March 12, 2008 +1 .45 is dead except for Swingle stack 1911's..... and please don't get me started on L10, I've been so good. Link to comment Share on other sites More sharing options...
UW Mitch Posted March 12, 2008 Share Posted March 12, 2008 If you like you 9mm Match, get a matching 40S&W Match When you start shooting USPSA, get some springs/follower and basepads from Henning, maybe a fiber optic you'll be all set! Link to comment Share on other sites More sharing options...
Johann the Horrible Posted March 12, 2008 Share Posted March 12, 2008 The 230gr doing 750fps knocks the pins clear off the table, every time. In IPSC I never hit a popper that did not do down. I like the recoil(gentle push) of a 45. For the 40 is mag capacity( you can((will?)) miss more often) and some people like the snappy recoil. I I was going to shoot pins I wold use a 45. You might choose to use something else. Shoot them both and then you decide. Link to comment Share on other sites More sharing options...
J-Ho Posted March 12, 2008 Share Posted March 12, 2008 I'd go with 40. If you are looking for versatility, you can't go wrong. If you want a dedicated bowling pin gun I'd go with a 45. Capacity won't matter. 15 seconds to clear 5 pins is an eternity. A lot of the top shooters here for our pin matches use a single stack. That being said I'd still go with the 40. Load 'em real hot for pins and you don't have to worry about the pins not falling. Plus you can use it as a limited gun in USPSA or ESP in IDPA. Link to comment Share on other sites More sharing options...
Nemo Posted March 12, 2008 Share Posted March 12, 2008 If you ONLY plan to use it for bowling pin shooting, go the 45 way. If there is a possiblity that you may try any of the practical pistol games (USPSA or IDPA) get the .40. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now