BBsound Posted December 27, 2007 Share Posted December 27, 2007 I have a 10 shot extension tube (I think Tac-Star brand) that I have been using for years. It has all of a sudden started slipping out of the nut that screws on to the factory mag tube. It appears to be a press fit, as I can remove the extension and hammer it back into place. any ideas? some superglue next time it slips out? Is there a Locktite product? FWIW its on an 11-87. And I do have a barrel clamp installed. Link to comment Share on other sites More sharing options...
GentlemanJim Posted December 27, 2007 Share Posted December 27, 2007 Silver solder if it is steel or replace it ...I doubt any glue would do it. Jim Link to comment Share on other sites More sharing options...
mpeltier Posted December 27, 2007 Share Posted December 27, 2007 If you cant silver solder it you might try JB weld epoxy. Clean both parts really good with laquer thinner before applying. Make sure any excess is wiped clean (especially inside where the shells ride) I have seen amazing things done with JB weld. Link to comment Share on other sites More sharing options...
RePete Posted December 28, 2007 Share Posted December 28, 2007 Silver solder if it is steel or replace it ...I doubt any glue would do it.Jim The original ones were glued, but don't know if they still are. JB Weld would work, but silver soldering would be better. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now