BigDave Posted March 6, 2003 Share Posted March 6, 2003 I came across an online retailer that has new unprimed 40 brass for ~$93/1000. When it comes to new brass, we talk alot of Starline and Winchester. Anyone have any experience with new PMC brass in 40? Link to comment Share on other sites More sharing options...
Loves2Shoot Posted March 6, 2003 Share Posted March 6, 2003 PMC has been around a long time and their stuff seems to be good quality. I have used a ton of once fired and it seems just as consistant as the other guys. Link to comment Share on other sites More sharing options...
Joe D Posted March 6, 2003 Share Posted March 6, 2003 I have bought 5,000-10,000 rounds of once fired PMC brass from http://www.brassmanbrass.com for about $12.00m. John has always delivered what he promised. Link to comment Share on other sites More sharing options...
TheOtherErik Posted March 6, 2003 Share Posted March 6, 2003 The case wall of PMC is a bit thicker than most. I ran across a bunch of once fired form a glock I wasnt able to be resized. The size die just pushed the bulge down further to the base. If you use a fully suported barrel and its new stuff you should be fine. The primer pockets are also really tight. Link to comment Share on other sites More sharing options...
warpspeed Posted March 6, 2003 Share Posted March 6, 2003 I have used PMC / ELD brass new in 9mm and it worked very well. Link to comment Share on other sites More sharing options...
TBF Posted March 9, 2003 Share Posted March 9, 2003 I have only tried PMC brass in 45, the limited samples I have tried were very inconsistant in wall thickness and bullet tension. Travis F. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now