Needing load data forG19 using MG 124rn

[John Baier]

Ok so I have some MG 124's laying around. Thought I would load them for my G19. I've done a search, but really can't find to much info using a G19. The powders I have are Titegroup, VV310, VV320, WST, Universal Clays. I would like to get a PF of 130.

So, what recipe would you start with?

Thanks for looking

~John

[Scout454]

John,

Are they hollowpoints?

4.2 of N320 at 1.145 should get you around a 130 in a 19.

All of my Titegroup loads were with 147's.

[wlktheduk]

John, the bullets are Precision Delta 124 grain FMJ/RN, so you may have to make adjustments with your Montana Gold bullets, but....

Powder: 4.1 grains TiteGroup

Primer: Federal SP 100 (also used Winchester Small Pistol)

Brass: mixed

OAL: 1.130

Chrongraph data: distance 10'

Pistol: Glock 17 (4.5" barrel)

average of 10 rounds: 1074 FPS

Power Factor 133.176

Pistol: Taurus PT-99 (4.9" barrel)

average of 10 rounds: 1086 FPS

Power Factor 134.664

As always, YMMV

[John Baier]

Thanks guys, they're round nose.

[Flexmoney]

wlktheduk's load with TG sounds about right to me.

(BTW, wlktheduk...you missed your chance. Anderson ran your favortie prop at the local match last Saturday...with a standing offer to allow anybody to burn it after the match. Nobody did.)