Aristotle Posted July 17, 2007 Share Posted July 17, 2007 I just ordered my .40 s&w die set for my new Glock 35 I bought this weekend. So I'm looking for suggestions on a good load data recipe to use in my glock 35 to shoot IPSC Limited major in. thanks. There's got to be a few Glock 35 limited IPSC/reloaders on here. Link to comment Share on other sites More sharing options...
Flexmoney Posted July 17, 2007 Share Posted July 17, 2007 There is lost of load data info down the forum a bit in the reloading section. Just to be sure, you do mean IPSC Major (Standard division - power factor for major = 170), not USPSA Major (Limited division - power factor for major = 165), correct ? Link to comment Share on other sites More sharing options...
Aristotle Posted July 17, 2007 Author Share Posted July 17, 2007 Sorry, I mis spoke. I meant USPSA Limited Major. I get so used to calling it IPSC. Link to comment Share on other sites More sharing options...
Joseph796 Posted July 17, 2007 Share Posted July 17, 2007 I just ordered my .40 s&w die set for my new Glock 35 I bought this weekend. So I'm looking for suggestions on a good load data recipe to use in my glock 35 to shoot IPSC Limited major in. thanks. There's got to be a few Glock 35 limited IPSC/reloaders on here. Check out -- http://www.k8nd.com/documents/hl40sw.pdf Link to comment Share on other sites More sharing options...
Matt Griffin Posted July 17, 2007 Share Posted July 17, 2007 Quick and dirty: 180gr moly/poly coated lead, 4.4gr Titegroup OAL 1.135 Works like a charm, makes about 173pf. H. Link to comment Share on other sites More sharing options...
cruiten Posted July 17, 2007 Share Posted July 17, 2007 Bear Creek 200 grain over 3.7 grains of Vit N320, WSP, OAL 1.127. Nice load that is good for 169-171 PF out of my Glock 35 with a factory barrel. Link to comment Share on other sites More sharing options...
dfwmiket Posted July 17, 2007 Share Posted July 17, 2007 4.6g of Vit n 320, 180g JHP , OAL 1.135.......... makes 171 for me. Link to comment Share on other sites More sharing options...
SA Friday Posted July 17, 2007 Share Posted July 17, 2007 180gr Zero HP 1.135 OAL WSP Brass doesn't matter. 4.9gr Universal Clays or 4.3gr Titegroup I liked the Universal load better. Link to comment Share on other sites More sharing options...
Smokecloud Posted August 6, 2007 Share Posted August 6, 2007 4.3 gr titegroup under 180 gr lasercast at 1.135 makes about 170 out of my factory and KKM barrel. Link to comment Share on other sites More sharing options...
Carlos Posted August 6, 2007 Share Posted August 6, 2007 When searching for .40 cal GLOCK data - make SURE the AOL listed is under 1.160". If the load is longer DO NOT REDUCE IT!!!!! Find another load instead. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now