fryeg7 Posted February 1, 2007 Share Posted February 1, 2007 http://www.precisionbullets.com/ i lucked into about 950 of these bullets (9mm 147grn flat-point) for the cost of shipping, which was $15 , but i'm having trouble finding reloading data for them. do these behave like normal lead bullets (i.e. can i use standard lead bullet charts)? or is there a special table for these? BTW, i'm using unique powder. thanks in advance and bear with me, i'm a reloading noob. frye Link to comment Share on other sites More sharing options...
ErikW Posted February 1, 2007 Share Posted February 1, 2007 For coated lead bullets, use lead bullet loading data. I always liked N330 with coated 147s. Before that, I liked Unique. They worked best at 850-900 fps. Link to comment Share on other sites More sharing options...
fryeg7 Posted February 1, 2007 Author Share Posted February 1, 2007 For coated lead bullets, use lead bullet loading data.I always liked N330 with coated 147s. Before that, I liked Unique. They worked best at 850-900 fps. thanks. frye Link to comment Share on other sites More sharing options...
Vizsladad Posted April 10, 2007 Share Posted April 10, 2007 Hey there, I am shooting an XD 9 Tactical 147 grn over 3.6grn bullseye, (from the Lee Loading Book) Performs very well in my gun recoil is not bad, and punches 2" hole at 25yds This load is good for me, but I am new to this load. The past load I was using was over Accurate powder #5, but my dealers can not get thtis for me now. I have my first match this weekend with this new load, but again all my practice has been promising. Link to comment Share on other sites More sharing options...
revchuck Posted April 11, 2007 Share Posted April 11, 2007 Frye - 3.7 grains of Unique under those bullets loaded to 1.14" OAL goes about 935 fps from my Beretta 92 Brigadier. That length works in my gun; you might have to play with the OAL for yours. Link to comment Share on other sites More sharing options...
Carlos Posted April 11, 2007 Share Posted April 11, 2007 I am usually a fan of titegroup - but not with the coated or lead bullets. Seems to produce too much smoke. N330 should serve you well - as should other single based, cool burning powders, and even some double based powders like Universal. BTW - there is actual published data for the 147 grn LEAD 9mm bullet and straight Clays (Lyman manual, I believe). That combo should be super soft shooting. Link to comment Share on other sites More sharing options...
45junkie Posted July 20, 2007 Share Posted July 20, 2007 I use the lead data and have had no problems. Link to comment Share on other sites More sharing options...
Christopher Posted September 11, 2007 Share Posted September 11, 2007 Frye, I use the Berry's 147's in my comped G34 and I loaded 6.3 grs of AA#7 and set them at 1.140. Velocity was around 975fps. Chris Link to comment Share on other sites More sharing options...
LPatterson Posted September 11, 2007 Share Posted September 11, 2007 3.1 Ramshot ZIP @1.125 132PF Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now