Gti18T Posted August 8, 2006 Share Posted August 8, 2006 I have my 650 set up for a 9mm now. How much would it cost for me to change everything to say a .45 or a .223? I'd buy a whole new powder measurer and dies and everything so it would be easy for me to swap out that whole top thing that holds the dies and powder dropper. HOw much would it cost though for all the parts to switch? Thanks Dan Link to comment Share on other sites More sharing options...
dillon Posted August 8, 2006 Share Posted August 8, 2006 (edited) $244.80 plus shipping per caliber. This cost includes the casefeed plate, assuming you have the electric case feeder. If you don't, then deduct $35.95 from the total Edited August 8, 2006 by dillon Link to comment Share on other sites More sharing options...
Gti18T Posted August 9, 2006 Author Share Posted August 9, 2006 $244.80 plus shipping per caliber. This cost includes the casefeed plate, assuming you have the electric case feeder. If you don't, then deduct $35.95 from the total Thanks dillon. Also wanted to thank you for getting my press all straightened out. I was the one calling like every day with a new part that was broken or to ask a question about why my press wasn't working. The primer arm ended up not being centered in the case turret. I sent it back and it was back at my house about 2 days after being fixed. It works great now and i was pounding out the rounds otday like nobody's business. Another example of the great customer service i've had so far with dillon. Everybody told me they would make good on the press i was having problems with and they sure did. Thanks again. I'll be shopping from your catalog in the near future. Link to comment Share on other sites More sharing options...
Bird_Dog0347 Posted August 9, 2006 Share Posted August 9, 2006 I did not see it mentioned, but does that price include a new powder check system or even just the die for it? Link to comment Share on other sites More sharing options...
dillon Posted August 9, 2006 Share Posted August 9, 2006 No. Add either $62.95 for each powder check, or $8.49 for each die Link to comment Share on other sites More sharing options...
benos Posted August 12, 2006 Share Posted August 12, 2006 I have my 650 set up for a 9mm now. How much would it cost for me to change everything to say a .45 or a .223? I'd buy a whole new powder measurer and dies and everything so it would be easy for me to swap out that whole top thing that holds the dies and powder dropper. HOw much would it cost though for all the parts to switch? ThanksDan What is required: http://www.brianenos.com/pages/dillonfaqs.html#650calconv A little bit more, with prices: http://www.brianenos.com/pages/dillon.html#650 Includes the "only on BE.com - Powder Check Conversion": http://www.brianenos.com/store/dillon.conv.650.html Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now