HOGRIDER Posted August 8, 2023 Share Posted August 8, 2023 (edited) https://www.markvii-loading.com/ Plus: Free, spare Tool Head!!!! Edited August 8, 2023 by HOGRIDER update Link to comment Share on other sites More sharing options...
SIGcurious Posted August 8, 2023 Share Posted August 8, 2023 Good deal! Link to comment Share on other sites More sharing options...
Sigarmsp226 Posted August 10, 2023 Share Posted August 10, 2023 (edited) Was talking to a CSR at Dillon Precision last week and he commented that they are fully stocked on reloaders now. I wonder if the sales of reloaders have slowed as a result of primer prices and the current availability of 1000 round cases of 9mm brass cased ammo selling for $250-$300 shipped per case…. Again, just speculating, but this could be the reason Mark7 reduced their pricing also. RCBS has HUGE rebates going on also right now…. Wonder if one would be better off purchasing two X-10’s vs. one Apex 10…. Edited August 10, 2023 by Sigarmsp226 Spellling Link to comment Share on other sites More sharing options...
SIGcurious Posted August 21, 2023 Share Posted August 21, 2023 Is there any advantage now to the Dillon RL1100 if the Apex is selling at around the same price? Unless I'm missing something ... a RL1100 w/ caliber kit = Apex 10. Link to comment Share on other sites More sharing options...
Joe4d Posted August 21, 2023 Share Posted August 21, 2023 (edited) On 8/10/2023 at 5:49 PM, Sigarmsp226 said: Was talking to a CSR at Dillon Precision last week and he commented that they are fully stocked on reloaders now. I wonder if the sales of reloaders have slowed as a result of primer prices and the current availability of 1000 round cases of 9mm brass cased ammo selling for $250-$300 shipped per case…. Again, just speculating, but this could be the reason Mark7 reduced their pricing also. RCBS has HUGE rebates going on also right now…. Wonder if one would be better off purchasing two X-10’s vs. one Apex 10…. Cant buy anythign from Dillon if they dont have it.. I saw a good deal on a NIB SDB at a local gunshop,, set up for either 9 or 38... Go on Dillon websight and ZERO caliber conversions or dies are available.... I mean the SDB uses propriety dies and not like any one other than a SDB owner would be buying them.. So tired of everythign everywhere gun related out of stock Edited August 22, 2023 by Joe4d Link to comment Share on other sites More sharing options...
HOGRIDER Posted August 22, 2023 Author Share Posted August 22, 2023 3 hours ago, SIGcurious said: Is there any advantage now to the Dillon RL1100 if the Apex is selling at around the same price? Unless I'm missing something ... a RL1100 w/ caliber kit = Apex 10. As a LONG TERM Dillon user that replaced the RL1100 with an Apex10, I can totally confirm that the 10 stations on the Apex 10 is a GAME CHANGER! And the Mark 7 machines are precison, CNC manufactured! And with the ability to update to a DIGITAL automation system that integrates some excellent sensors, I think you would be 110% satisfied with the Apex 10 along with Mark 7's EXCELLENT Customer Service! Link to comment Share on other sites More sharing options...
plinker625 Posted August 23, 2023 Share Posted August 23, 2023 Without carbide to make dies i.e. conversion kits for Square Deal B presses....Dillon has no presses to sell. Spurts of conversions come out. But, Dillon is still in supply chain issue with carbide for dies. Due to unprecedented demand, we are not accepting backorders on out of stock magazines, bullets, brass and some other items. Our future cost and delivery are uncertain at this point. If you see an item that displays "Out of Stock" that means we hope to get it back in stock but do not allow backorders. Items that say "backorder" means the item IS expected back in stock and you may backorder it. IMPORTANT NOTICE ABOUT DIES: Dillon Precision has added a second domestic carbide supplier. Their job is to make large quantities of a single caliber handgun carbide insert. They are finishing 45ACP now and beginning 38/357. After they finish those calibers, the next two they will make are 10mm/40 S&W and 380ACP. Our primary carbide supplier is currently concentrating on 300 Blackout and 223 Remington. They are also making small quantities of handgun carbide in the calibers not coming from our new supplier. The dates below are our current estimate for delivery, based on recent delivery history and knowledge of what we expect to be delivered and when we expect to receive it. Reloading Machines: Square Deal B - Refer to caliber lead times RL550C - In Stock XL750 - In Stock Super 1050 - Refer to caliber lead times Super 1050 (no dies) - In Stock RL1100 - Refer to caliber lead times RL1100 (no dies) - In Stock CP2000 - In Stock SL900 - In Stock Essentials Packages - 60 weeks (dies) Carbide Die Orders Placed Before 9/1/2022 9mm 18-20 weeks .45 ACP 6-10 weeks .38 / .357 6-10 weeks .38 Super 36-42 weeks 10mm / .40 Caught Up .32 S&W 36-42 weeks .380 ACP Caught Up .357 SIG 42-46 weeks .44 SPL / Mag 36-42 weeks .223 10-12 weeks .300 Blackout Caught Up .308 Caught Up 45 Colt 36-42 weeks Carbide Die Orders Placed AFTER 9/1/2022: 9mm 30-34 weeks .45 ACP 18-20 weeks .38 / .357 18-20 weeks .38 Super 44+ weeks 10mm / .40 6-8 weeks .32 S&W 44+ weeks .380 ACP In Stock .357 SIG 48+ weeks .44 SPL / Mag 44+ weeks .223 24-30 weeks .300 Blackout 10-12 week .308 In Stock 45 Colt 36-42 weeks Link to comment Share on other sites More sharing options...
plinker625 Posted August 23, 2023 Share Posted August 23, 2023 (edited) Reloading hardware is not moving at all. Presses and auto-drives are not moving. Even 550 and 750 presses are not moving. Heck Dillon has 10% off some kit deals. Edited August 23, 2023 by plinker625 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now