10mmdave Posted July 24, 2023 Share Posted July 24, 2023 I didn't want to thread drift revolver45's post titled "9mm in a 38 Super" so here's my question. Anyone ever try to roll size 9mm down with a set of .357 dies ?? I think this would be a way to use the short brass folks want for the speedy reload and the better 9mm moon clips. Brass would be plentiful, not cost a bunch, and probably last forever. Folks already use all sorts of bullet sizes in 929's. Being Revo shooters we get all our brass back so it wouldn't be too much of a time loss. So what do the Revo folks think ? Personally I like the robustness and thicker clips of the 9mm, but like the longer brass of the 38 Super, I never have been able to get a good reload with the shorter 9mm brass. Link to comment Share on other sites More sharing options...
ysrracer Posted July 24, 2023 Share Posted July 24, 2023 I tried, but it was easier to just use .38 Short Colt. Which is more or less a 9mm case with a rim. I measured the internal capacity, and they were basically the same. Link to comment Share on other sites More sharing options...
MikeyScuba Posted July 24, 2023 Share Posted July 24, 2023 I load my 9mm 929 to 1.19(RN) which isn't too much different than the 1.225 (jhp) I load for super comp. Link to comment Share on other sites More sharing options...
ysrracer Posted July 24, 2023 Share Posted July 24, 2023 3 hours ago, MikeyScuba said: I load my 9mm 929 to 1.19(RN) which isn't too much different than the 1.225 (jhp) I load for super comp. Yep, I'm at 1.19 also. For both .38 Short Colt and 9mm in my revo's. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now