darthdively Posted June 24, 2020 Share Posted June 24, 2020 Just wondering what's out there to reduce trigger pull on a P10F. i know a reduced striker spring is an option but there are limited options out there. i glanced at a thread where someone used Glock striker springs. Apparently they are the same in P10 and glock? anyone have experience with this? thanks! Sent from my SM-N950U using Tapatalk Link to comment Share on other sites More sharing options...
Benevolence Posted June 24, 2020 Share Posted June 24, 2020 Yep! 3lb glock striker spring was a direct drop in for me with no light strikes. Link to comment Share on other sites More sharing options...
darthdively Posted June 24, 2020 Author Share Posted June 24, 2020 Yep! 3lb glock striker spring was a direct drop in for me with no light strikes. are all glock striker springs the same? could i just pick any glock spring? i never owned a glockSent from my SM-N950U using Tapatalk Link to comment Share on other sites More sharing options...
Benevolence Posted June 26, 2020 Share Posted June 26, 2020 On 6/24/2020 at 2:52 PM, darthdively said: are all glock striker springs the same? could i just pick any glock spring? i never owned a glock Sent from my SM-N950U using Tapatalk I believe they're all the same but if there's an option, G17 should do fine. I believe it's G17 as well for recoil spring as well but check the big Upgrades for Competition thread Link to comment Share on other sites More sharing options...
SGT_Schultz Posted June 26, 2020 Share Posted June 26, 2020 Glock striker springs and spring cups fit the P-10's perfectly. Make sure you buy 5 or 10 pairs of Glock spring cups. They are cheap, readily available (unlike the OEM ones) and so damned easy to lose when re-installing the spring on the striker. Link to comment Share on other sites More sharing options...
BryceA Posted June 27, 2020 Share Posted June 27, 2020 On 6/24/2020 at 12:41 PM, Benevolence said: Yep! 3lb glock striker spring was a direct drop in for me with no light strikes. Funny, I tried a 4lb glock spring and got light strikes on CCI primers, like every 3rd round. Maybe I didn't get the cups right or something as I have heard nothing but good luck for others. Link to comment Share on other sites More sharing options...
Benevolence Posted June 27, 2020 Share Posted June 27, 2020 13 hours ago, BryceA said: Funny, I tried a 4lb glock spring and got light strikes on CCI primers, like every 3rd round. Maybe I didn't get the cups right or something as I have heard nothing but good luck for others. Huh. Ya that’s weird. Mine worked on crap steel case. Not a single error in the 750 rounds I shot. I’d try reassembling and cleaning the striker assembly and channel. Link to comment Share on other sites More sharing options...
pani Posted July 20, 2020 Share Posted July 20, 2020 I installed a 2.5 lbs glock spring and have no issues with Magtech 124 grs and Geco 124 grs. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now