oddjob Posted August 29, 2005 Share Posted August 29, 2005 I saw here where a 40 cal shell plate can be used for a 9mm with #3 pins on a 1050. Can I use the .223 shellplate for 9mm if I get different pins?? Thanks Link to comment Share on other sites More sharing options...
Matt Cheely Posted August 29, 2005 Share Posted August 29, 2005 I thought the pins were the same for .223 and 9mm but not the plate. I'd have to check.... Link to comment Share on other sites More sharing options...
D.Hayden Posted August 29, 2005 Share Posted August 29, 2005 All 3 of those have different shell plates.. 9MM and 38Super are the same .223 and .380 are the same 40, 10MM, 9x25 the sane Link to comment Share on other sites More sharing options...
George Posted August 29, 2005 Share Posted August 29, 2005 The 9mm sized shellplate for my 550 is NOT interchangeable with the .223 one. The locating pins are. -- Regards, Link to comment Share on other sites More sharing options...
stingerjg Posted August 29, 2005 Share Posted August 29, 2005 I use a .223/.380 shell plate to load 38 Super Comp. It will not allow a 9mm into the shell plate. The buttons are the same but the plate is different. cal_cross_ref_chart.htm Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now