billthemarine2862 Posted January 14, 2019 Share Posted January 14, 2019 (edited) I am currently set up with a FF3 with a Henning dovetail mount on my shadow that is going to be used for carry optics. I have a decent mill drill that is certainly good enough to do the work and I am thinking about milling the slide to direct mount the optic. Does anyone know for sure if I can directly mount to the milled Shadow slide? Or will I need to use some sort of adapter plate for the screws on the FF3? I am concerned that the screws that hold the FF3 in place are a little to far apart for the shadow slide and wont have room to drill and tap holes directly in the slide. Not sure if it is worth all the effort if I end up needing an adapter plate of some sort since the dot will not be much lower than it is now with the dovetail mount. Edited January 14, 2019 by billthemarine2862 Link to comment Share on other sites More sharing options...
eerw Posted January 14, 2019 Share Posted January 14, 2019 You can direct mill a Ff3 to a Shadow slide Link to comment Share on other sites More sharing options...
billthemarine2862 Posted January 14, 2019 Author Share Posted January 14, 2019 Thanks! Link to comment Share on other sites More sharing options...
hello0o0o0o Posted January 17, 2019 Share Posted January 17, 2019 (edited) Yeah you can direct mill. You just need to find a company to do it and tell them what optic or send it with the gun. cajun gun works will do it and so will cz custom or a local shop. alternatively czc sells a dovetail mounting plate but I’d recommend just doing the full mil Edited January 17, 2019 by hello0o0o0o Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now