LukeWL Posted May 15, 2018 Share Posted May 15, 2018 (edited) I have pulled the press apart and cleaned/lubed everything. The indexing pawl is jumping when the index bolt rounds the lower part of the cam into the 'valley' this is happening without the shell plate on so it is not the indexing arm catching on shell plate. the problem seems to go away when I put more pressure on the handle on the downstroke. Will post video once it loads to youtube Edited May 15, 2018 by LukeWL Link to comment Share on other sites More sharing options...
IronicTwitch Posted May 15, 2018 Share Posted May 15, 2018 The pawl mechanism is actuated by the bolt on the frame. Is the plastic part that holds the pawl finger straight and smooth where it engages the bolt? Is the spring that holds that plastic part to the ram in the correct position? Those are the first two things I would guess are the issue... Link to comment Share on other sites More sharing options...
LukeWL Posted May 15, 2018 Author Share Posted May 15, 2018 Yep the finger is perfect and now nicely greased. The spring is in good shape and positioned correctly. Link to comment Share on other sites More sharing options...
9x45 Posted May 17, 2018 Share Posted May 17, 2018 You need to contact Dillon. The pawl adjustment is set from the factory. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now