SoCalShooter69 Posted November 9, 2017 Share Posted November 9, 2017 Thank you for your past or present service to this great country. Link to comment Share on other sites More sharing options...
johnbu Posted November 9, 2017 Share Posted November 9, 2017 The best guns, the best parts from the best people.... now at an unbelievably low price. Shooting season is over. Time to refresh guns. This is what i think a good package would be; Recoil spring Trigger spring sear spring hammer spring (i don't refresh the PD FP return spring) Extractor spring Before ordering, inspect the extractor, sear, hammer, firing pin and block. Make sure they aren't damaged or worn. Order replacenents as needed. Polish everything again, hit those places you missed. If you haven't upgraded to a BOLO, order one, the 1 piece sear and extended fpb. For winter dry fire practice, i install the STRONGEST hammer spring i have. Helps to improve trigger control. Then 3 weeks before the first spring match, i go back to the PD15.5 and live fire a bunch. Well, that's my plan anyway. Link to comment Share on other sites More sharing options...
SoCalShooter69 Posted November 9, 2017 Author Share Posted November 9, 2017 Your 1099 is in the mail, John. Lol. Link to comment Share on other sites More sharing options...
johnbu Posted November 9, 2017 Share Posted November 9, 2017 I wish! i gotta go walk the freeway looking for old beer cans to get enough to buy springs! Link to comment Share on other sites More sharing options...
DesertTortoise Posted November 9, 2017 Share Posted November 9, 2017 Can you recommend a hammer spring for a limited custom .40 ? I'm not sure whats in the gun right now, but I'm getting 2.5 pull with consistent ignition on winchester (and any other ) primers Link to comment Share on other sites More sharing options...
johnbu Posted November 9, 2017 Share Posted November 9, 2017 I would get a 15.5 along with the optimized trigger and sear springs. Polish up the trigger bar, plunger and all the pins / holes in the sear and hammer. Also shine up the inside of the firing pin channel. You should keep at the 2.5# and be 100% reliable. You can drop to 2# with a 14# spring and better polishing. Link to comment Share on other sites More sharing options...
Alderleet Posted November 10, 2017 Share Posted November 10, 2017 Fantastic timing. I was holding out for a titan/bolo until there was a sale. Link to comment Share on other sites More sharing options...
MemphisMechanic Posted November 13, 2017 Share Posted November 13, 2017 On 11/9/2017 at 12:52 PM, DesertTortoise said: Can you recommend a hammer spring for a limited custom .40 ? I'm not sure whats in the gun right now, but I'm getting 2.5 pull with consistent ignition on winchester (and any other ) primers Johnbu is on the ball. The hammer spring doesn’t have nearly the effect on SA triggers that it does on the DA stroke for the Production guns. Mirror-polish everything and stick a 15.5 or a14 at least in there, and you’ll probably be in love with the trigger. Link to comment Share on other sites More sharing options...
DesertTortoise Posted November 14, 2017 Share Posted November 14, 2017 These got here quick, thanks ! Link to comment Share on other sites More sharing options...
Leohe8888 Posted November 21, 2017 Share Posted November 21, 2017 nice promotion Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now