Need A Minor .40 Load Using These Components

[sasquatch981]

Hi,

I just picked up a G35 and need a minor load to shoot production. The load and components I have been uisng for my STI are these:

Master Blaster 180's

Federal Primers

Vhit 320 (4.5 Grains), Ramshot Competition (4.5 Grains), Ramshot Silouette.

Once Fired Brass.

OAL: 1.200

What I would like to hear from you guys is a nice soft minor load to use in the Glock that use at least one of the powders listed above, as I have it coming out of my ears and would like to use it up. Thanks for your help guys.

BTW, what OAL should I load to for a glock (does it make a difference for a 22, or a 35?), and what weight recoil spring is in the gun that is used in the loads offered. Thanks.

Matt

[Sniper1Moore]

My load for IDPA is 3.7 grains of VV N320 with a 180 grain FMJ with an OAL of 1.145 . Win standard small primers.I use this with the factory spring in my 35 and 22.Hope this helps,Ken

[Flexmoney]

BTW, what OAL should I load to for a glock (does it make a difference for a 22, or a 35?), and what weight recoil spring is in the gun that is used in the loads offered.  Thanks.

1.135 OAL

No diiference between G22 OAL and G35 OAL

Grab a 15# and a 13# spring and try them.

[bberkley]

I used the Masterblaster bullets ever so briefly.

They are actually 178gr or so.

3.2gr N320

180gr Moly (Masterblaster or Bear Creek)

1.130 OAL

15# spring

Nice and soft load. Bump .3 or .4 for jacketed.