SnivelingDramaQueen Posted July 8, 2016 Author Share Posted July 8, 2016 The Frame can be cut and will not be noticed i.e. blended. Fundamentally, what you want accomplished can be done by a great gunsmith. Everyone has an opinion on who is great so they can chime in on topic. The way it looks the optic will go on the frame so the mating of the slide, barrel and frame is critical. You might not notice any issue until you start shooting at 50 yards or so. Just my opinion. Personally, I think Don is exceptional. I sent him mail today with picture , still wait response from him. Link to comment Share on other sites More sharing options...
BeerBaron Posted July 11, 2016 Share Posted July 11, 2016 Actually the longer rails may pose an issue in this instance. The 5.4 is built using a 6 inch slide and barrel cut down so they can get away with rails that are longer. If you did have a 5 inch slide fitted then it may not open far enough to pickup a round before the longer rails hit the tapered potion of the slots inside the slide. So you would probably have to have the rails shortened to the standard length. I see said the blind man. looks like reverse plug tunnel on the slide may have to be shortened a bit too as otherwise it'll run into the bed. still, hard to speculate on whether it not it'll work wtihout having more data to play with so I'll leave this to the pros. hope you get a good result. Link to comment Share on other sites More sharing options...
SnivelingDramaQueen Posted July 13, 2016 Author Share Posted July 13, 2016 I fixed gun and right now work perfect!! Change ejector,extractor problem solved! Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
MrPostman Posted July 14, 2016 Share Posted July 14, 2016 (edited) I fixed gun and right now work perfect!! Change ejector,extractor problem solved! Sent from my iPhone using Tapatalk Great! Now you can like your gun again Edited July 14, 2016 by MrPostman Link to comment Share on other sites More sharing options...
SnivelingDramaQueen Posted July 14, 2016 Author Share Posted July 14, 2016 I fixed gun and right now work perfect!! Change ejector,extractor problem solved! Sent from my iPhone using Tapatalk Great! Now you can like your gun again I use extractor and ejector from my another SV 40 s&w setup , run with same ammo and magazine and he work ! Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
MissionaryMike Posted July 14, 2016 Share Posted July 14, 2016 Lots of problem with this gun... You changed out the extractor. Great! What else is wrong with it? You made it seem like it needed a grave. Or was all the fuss about a broken extractor? Link to comment Share on other sites More sharing options...
MissionaryMike Posted July 14, 2016 Share Posted July 14, 2016 ...and ejector. Link to comment Share on other sites More sharing options...
SnivelingDramaQueen Posted July 14, 2016 Author Share Posted July 14, 2016 Mike I'm not check is broken or no...I belive he made mistakes and installed 9mm extractor and ejector. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
MissionaryMike Posted July 14, 2016 Share Posted July 14, 2016 Alright, well I'm glad your piece is up and running. Now you can get back to enjoying that fine pistol as you should have been able to. I'm very impatiently waiting for mine. I think I've got, what, 12 months left? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now