Shmella Posted June 3, 2016 Share Posted June 3, 2016 Hello all, I will have a 1050 set up in 223. dies and all. I dont shoot 223 I only shoot 9mm. I am buying the press because I am getting a decent deal on it. What will I have to list or what is the easiest way to get this set up in 9mm? I know the information is out there but Im getting confused on what I will have and what I will need to do this. I know I'll need a new case feeder plate, Probably a new powder die.. What else? Also are the casefeeder plates the same for the 550, 650, and 1050 casefeeders? Link to comment Share on other sites More sharing options...
SCTaylor Posted June 3, 2016 Share Posted June 3, 2016 Start reading here: http://brianenos.com/store/dillon.conv.1050.html Link to comment Share on other sites More sharing options...
Shmella Posted June 3, 2016 Author Share Posted June 3, 2016 Ive been to that page numerous times. Link to comment Share on other sites More sharing options...
warpspeed Posted June 3, 2016 Share Posted June 3, 2016 You need 9mm dies ( PN 14406 ) , a 9mm 1050 conversion ( PN 20482 ) and the small pistol casefeeder plate ( PN 21073 ) That's it. Link to comment Share on other sites More sharing options...
Shmella Posted June 3, 2016 Author Share Posted June 3, 2016 Will the powder die that comes with the press set up for .223 work? Link to comment Share on other sites More sharing options...
Shmella Posted June 3, 2016 Author Share Posted June 3, 2016 You need 9mm dies ( PN 14406 ) , a 9mm 1050 conversion ( PN 20482 ) and the small pistol casefeeder plate ( PN 21073 ) That's it. Thank you that is what I thought but wasnt sure. how about the powder die? Link to comment Share on other sites More sharing options...
jmorris Posted June 3, 2016 Share Posted June 3, 2016 Thank you that is what I thought but wasnt sure. how about the powder die? That's in the 9mm conversion kit along with all the other parts you need, except dies and case feed plate as he noted. If you don't get all of the parts that came with the 1050 originally you also might need the small powder bar for your measure. Link to comment Share on other sites More sharing options...
Shmella Posted June 3, 2016 Author Share Posted June 3, 2016 Everything should be new in the package as it comes from dillon. So there is another powder bar for the measure that should come with it, Thanks. I have dies. Is the case feeder plate the same on the 550,650,and 1050? Ive heard of people using hornadys case feeder plates on dillons case feeder for the 650. Anyone have any experience with interchangeability with hornady case feeder plates and the 1050 casefeeder? Link to comment Share on other sites More sharing options...
DWFAN Posted June 3, 2016 Share Posted June 3, 2016 My Hornady small rifle plate would not work on my Dillon casefeeder with out some trimming. Link to comment Share on other sites More sharing options...
Shmella Posted June 3, 2016 Author Share Posted June 3, 2016 My Hornady small rifle plate would not work on my Dillon casefeeder with out some trimming. Thanks, I'll just plan on getting a dillon small pistol plate. Link to comment Share on other sites More sharing options...
benos Posted June 3, 2016 Share Posted June 3, 2016 You need 9mm dies ( PN 14406 ) , a 9mm 1050 conversion ( PN 20482 ) and the small pistol casefeeder plate ( PN 21073 ) That's it. Thank you that is what I thought but wasnt sure. how about the powder die? The caliber-specific Powder Funnel comes in the Caliber Conversion Kit. The non-caliber specific Powder Die you can use from the existing setup. Link to comment Share on other sites More sharing options...
Shmella Posted June 3, 2016 Author Share Posted June 3, 2016 You need 9mm dies ( PN 14406 ) , a 9mm 1050 conversion ( PN 20482 ) and the small pistol casefeeder plate ( PN 21073 ) That's it. Thank you that is what I thought but wasnt sure. how about the powder die? The caliber-specific Powder Funnel comes in the Caliber Conversion Kit. The non-caliber specific Powder Die you can use from the existing setup. Awesome, that clears up my confusion. Thank you almighty one. Link to comment Share on other sites More sharing options...
Shmella Posted June 4, 2016 Author Share Posted June 4, 2016 Does the pistol swager come with the conversion kit ? I got the press but haven't attempted setup yet. Still in the package dated 2001.. Link to comment Share on other sites More sharing options...
DWFAN Posted June 4, 2016 Share Posted June 4, 2016 It's based on primer size. Small pistol and rifle swager is the same. Link to comment Share on other sites More sharing options...
Shmella Posted June 4, 2016 Author Share Posted June 4, 2016 (edited) What about the die above the swaging station? Doesn't that expand the case and rifle and pistol different ? Edited June 4, 2016 by Shmella Link to comment Share on other sites More sharing options...
DWFAN Posted June 4, 2016 Share Posted June 4, 2016 the 9mm expander/backup rod comes with the 9mm conversion kit. Link to comment Share on other sites More sharing options...
Shmella Posted June 4, 2016 Author Share Posted June 4, 2016 Awesome thank you! Link to comment Share on other sites More sharing options...
Shmella Posted June 4, 2016 Author Share Posted June 4, 2016 I will say for a press that say in a box for 15 years Dillon did a good job from the factory greasing this machine. No rust anywhere except for the powder die. The insert is rusted. Other than that this thing is mint. I can't wait to start pulling the handle on this. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now