HydraSports Posted February 8, 2016 Share Posted February 8, 2016 Does anyone possibly have the OAL for the old style EAA Witness small frame in 9 X 21, which should be the same for 9mm as well ? This was the same frame as the Springfield P9 if I remember correctly. Link to comment Share on other sites More sharing options...
Glk21C Posted February 8, 2016 Share Posted February 8, 2016 1.160 is what I loaded my 9x21's to with 124rn. I don't load it anymore but I think that is in the range of factory 9x19 oal? I don't feel like Google'ing that right now..... Link to comment Share on other sites More sharing options...
HydraSports Posted February 8, 2016 Author Share Posted February 8, 2016 Yes I searched also and read everything about everything and nothing about 9 X 21 or 9mm OAL ........ I got tired of searching and reading also... : (( Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted February 8, 2016 Share Posted February 8, 2016 Might vary depending on the individual bullet shape and size ... The Plunk Test is your Friend. Link to comment Share on other sites More sharing options...
Glk21C Posted February 8, 2016 Share Posted February 8, 2016 This is what I did not feel like looking up, the oal of 9x19 because Oal for 9x21 is the same as 9x19. https://en.m.wikipedia.org/wiki/9%C3%9719mm_Parabellum Link to comment Share on other sites More sharing options...
kneelingatlas Posted February 8, 2016 Share Posted February 8, 2016 With round nosed bullets you should be able to load out to ~1.170-1.180 I shot a match with RN bullets loaded to 1.189" and had the occasional long round hag up. Link to comment Share on other sites More sharing options...
kneelingatlas Posted February 8, 2016 Share Posted February 8, 2016 The Plunk Test is your Friend. The plunk test doesn't tell you anything about the mags. Link to comment Share on other sites More sharing options...
HydraSports Posted February 9, 2016 Author Share Posted February 9, 2016 I found some old ammo tonight that was loaded from long ago (Old Power Floor) and it came in at around 1.159, I think 1.160 and below will be the ticket. Just wanted to confirm and make sure. Thanks for your help. Link to comment Share on other sites More sharing options...
HydraSports Posted February 9, 2016 Author Share Posted February 9, 2016 But you have to tell me what the plunk test is though Hi-Power Jack, even for this old timer.... Link to comment Share on other sites More sharing options...
ipscjoe Posted February 9, 2016 Share Posted February 9, 2016 Back in the day I used 1.150 for everything in my p9's Link to comment Share on other sites More sharing options...
HydraSports Posted February 11, 2016 Author Share Posted February 11, 2016 ipscjoe Im not going to say that isn't the correct OAL, but all I had to go on was some old ammo that I found that was loaded to 1.159 and Im going to guess it worked but It's been so long I cant confirm. Im thinking about trying 1.155 and if it varies to 1.159 I should be ok. Im letting my cousins son who is new shoot it so I was trying to figure it out. This should be a good one for him to start out with, it's set up with a comp and dot and one heck of a trigger job I had Henning do on it (which cost more than the gun is worth : )) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now