5pins Posted April 18, 2015 Share Posted April 18, 2015 Looking to make minor. I think I will start at 4.0 grains. Anyone try this combination? I also have some 700X I could try but mostly titegroup. Link to comment Share on other sites More sharing options...
racknrider Posted April 19, 2015 Share Posted April 19, 2015 I shoot 3.2g of TG under a 180 for minor. I'm thinking around 3.5g would be a good starting point for the 165. Link to comment Share on other sites More sharing options...
dave33 Posted April 22, 2015 Share Posted April 22, 2015 As a reference I just loaded 4.1 gr of titegroup under a 165 plated flat nose at 1.125 and averaged 886 FPS~146 PF out of my CZ P09. Was pretty accurate and plenty of function with stock springs. You could probably start lower. Link to comment Share on other sites More sharing options...
jtaylor996 Posted April 22, 2015 Share Posted April 22, 2015 I found a fantastic minor load for my gun using titegroup. 3.5gr over a BBI 180gr bullet loaded to 1.2" OAL. This was orders of magnitude more accurate than all of the other loads I tried, even though it's a little hotter than strictly required. Link to comment Share on other sites More sharing options...
5pins Posted April 26, 2015 Author Share Posted April 26, 2015 I decided to go with 4gr of TG because I was having some feeding issues with 3.5 and 180gr in my G22 and G35. Although it not as soft as the 180gr load, its still pretty mild and I’m hopping it will knock down poppers with a little more authority in my 2 gun matches. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now