caz41 Posted April 5, 2015 Share Posted April 5, 2015 The carrier latch roll pin on a versamax has been walking out downward while firing. I replaced the pin with a new one and it does the same thing. Any remedies? Link to comment Share on other sites More sharing options...
BigBets Posted April 5, 2015 Share Posted April 5, 2015 PM Mark username MarkCO...He knows all things shotgun!!! Jacob Link to comment Share on other sites More sharing options...
theKenny Posted April 5, 2015 Share Posted April 5, 2015 I put one of these in not the right size but you get the idea http://www.asmc.net/5-32x1-Roll-Pin-Spring-Pin-440-Stainless-Steel-Pk-10/ Link to comment Share on other sites More sharing options...
GunCat Posted April 5, 2015 Share Posted April 5, 2015 A drop of blue Loctite on the last 1/4” of the pin before it enters the receiver, or expand that end of the pin so it holds tighter (not too much, you don't want to stress the receiver metal. .003-.005” may do it) Link to comment Share on other sites More sharing options...
AFguywhoshoots Posted April 8, 2015 Share Posted April 8, 2015 I put mine up in there and then put a little 2 part epoxy to keep it from migrating out. Link to comment Share on other sites More sharing options...
Bigsampson Posted April 9, 2015 Share Posted April 9, 2015 I trimmed my pin a tad short, mixed up some JB weld, counter sunk it just a tad and filled in the JB weld. Then blended it in. Can't really see it without looking and the JB weld will punch out easily if I need to remove the roll pin. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now