pbcaster45 Posted September 13, 2004 Share Posted September 13, 2004 Want try Hodgdon Clays with a 130 gr. Rainier (LOAL 1.280) in my Kimber 5-inch .38 Super. Something in the 900 - 1000 fps range for fun. Anybody have a suggestion on where to start? Haven't seen anything with Clays in the loadbooks. Thought maybe 3.7 - 4.0 grs. might work but I'm not sure,... Link to comment Share on other sites More sharing options...
Guest Larry Cazes Posted September 14, 2004 Share Posted September 14, 2004 Im not surprised that there is NO data available for clays in 38super. What is the goal here? Link to comment Share on other sites More sharing options...
pbcaster45 Posted September 14, 2004 Author Share Posted September 14, 2004 Clays works really great in my .45 Auto. I've been using 3.7 grs. with a 230 gr. Rainier and its accurate and clean. Since I've got plenty of Clays I was wondering if it would work the same in the .38 Super. If not I'll just stick with HP-38 or W231. Link to comment Share on other sites More sharing options...
Dream Posted September 14, 2004 Share Posted September 14, 2004 for a light load i use 4756 and 115's (berrys) Link to comment Share on other sites More sharing options...
sargenv Posted September 15, 2004 Share Posted September 15, 2004 Define light? You might be able to use data for 38 ACP (The precursor to 38 super). Same cartridge length, same bullet weights, half the pressure. We are not talking about .380 auto here. Or you could use standard book load 38 super.. and you know.. stay within common pressure limits. Vince Link to comment Share on other sites More sharing options...
gm iprod Posted September 16, 2004 Share Posted September 16, 2004 A very light load that I have used (125pf) for NRA AP is a Zero 9mm 125gr JHP with 4.0gr Hodg TiteGroup. Clays is a little quick and gives very high pressures with a 130gr Lead or Plated Projectile. I have used a 125gr Coated Lead bullet with 3.8gr Red Dot and got just on 1050fps = 131pf. Quite accurate but not as soft as you think. I am working on a ISU Bullseye load using a 125gr Lead Projectile and 3.2 grains of Clays. 800fps but you have a single shot pistol with a std 13lb spring. Lets just say this is a work in progress Link to comment Share on other sites More sharing options...
Leroy Posted September 16, 2004 Share Posted September 16, 2004 I have good luck with a 125gr HAP bullet similair to the zero 125jhp a little more accurate. I use 4.1 gr of vv-n320..oal -1.240. Very nice shootin and clean...and accurate. hope this helps Leroy Link to comment Share on other sites More sharing options...
pbcaster45 Posted September 17, 2004 Author Share Posted September 17, 2004 Hmmm, lots of options here. I think I'll give 4756 a try. Is it similar to WAP? I'd considered using Bullseye but now I'd rather try something else, got tired of all the black flecks on my forearms. Thanks for the input everyone. Link to comment Share on other sites More sharing options...
Alan550 Posted September 18, 2004 Share Posted September 18, 2004 pbcaster45, For the W231, you could try 4.9-5.1 gr with a 1.250 oal. One of the top 20 at the Cup this year used that load with a 125 gr HAP. Alan~^~ Link to comment Share on other sites More sharing options...
Kimberkid Posted September 19, 2004 Share Posted September 19, 2004 to answer your real question, i dunno, as an aside, try a zero 115jhp on top of 4.5 of N320 loaded to 1.25. ultra soft, should make bianchi power factor and shoots into 1" at 50 through 2 different Bianchi guns I have shot. i also know of a 122 gr. lead truncated cone bullet load that feels like a rimfire but still makes power factor. I dont remember what powder, if u r interested PM and ill find the recipe book. Link to comment Share on other sites More sharing options...
blackdragon Posted September 22, 2004 Share Posted September 22, 2004 I have used 4.9g 231 at 1.240 for my steel loads, Am Handgunner, Steel Challenge, seems to work good. Ivan SCS Vegas Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now