BBBB Posted September 27, 2011 Share Posted September 27, 2011 I am using a Comp-Tac Twin Mag pouch for my XDM on a 1.5" Wilderness instructors belt (it is the version of the pouch designed for a 1.5" belt) for IDPA. I find the pouch tends to move more on the belt than I would like. I feel this is affecting my reloads since the magazine is not always in the same place. I am wondering if anyone else has run into this and what of anything they did to solve it. Link to comment Share on other sites More sharing options...
The_Vigilante Posted September 27, 2011 Share Posted September 27, 2011 Try using tape/velco to build up the inside of the holster where it meets the belt. Link to comment Share on other sites More sharing options...
Aircooled6racer Posted September 27, 2011 Share Posted September 27, 2011 Hello: Try a CR Speed inner belt. It is thicker and works better than the Wilderness belt. The Comp-Tac leather belt works also. I also like the 2 single Comp-tac mag holders better with either the Tek-Loc or standard belt mount. Hope this helps. Thanks, Eric Link to comment Share on other sites More sharing options...
2MoreChains Posted September 27, 2011 Share Posted September 27, 2011 Can you thread the mag pouch onto your belt so that one of the belt loops is trapped between the two pouches? Or position the mag pouches between two belt loops so the loops limit how much movement there is fore and aft? Link to comment Share on other sites More sharing options...
czambesi Posted September 27, 2011 Share Posted September 27, 2011 Can you thread the mag pouch onto your belt so that one of the belt loops is trapped between the two pouches? Or position the mag pouches between two belt loops so the loops limit how much movement there is fore and aft? I put a loop in between and use comp tac belt Link to comment Share on other sites More sharing options...
BBBB Posted September 28, 2011 Author Share Posted September 28, 2011 Thanks for the suggestions. I'll try some of them and post back if I figure something out that improves the situation. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now