assaulter Posted July 25, 2010 Share Posted July 25, 2010 I have a #8 dawson front and factory #8 rear and my Sig is shooting 3-4" low at 20 yards. Does anyone know of an adjustable rear? Link to comment Share on other sites More sharing options...
gordonm1 Posted July 26, 2010 Share Posted July 26, 2010 meprolight used to make an adjustable night site I put on my old 220. I still use it even though the night sites are dead. You may be able to find a better suited sight but that one worked ok on my old sig. It went in hard and I should have sanded the site base before I pounded it in. Link to comment Share on other sites More sharing options...
bunsen27 Posted July 26, 2010 Share Posted July 26, 2010 I have one on my P226 that came with it (used gun). I'll see if I can get a make and model off of it when I get home for you. Link to comment Share on other sites More sharing options...
HuskySig Posted July 26, 2010 Share Posted July 26, 2010 I'm not a huge fan of adjustable rear sights, but you could always put one of Dawson Precision's Springfield XD adjustable rear sights on your P226. The Springfield XD and Sig P22X dovetails are identical. Currently, I use a Dawson Precision XD fixed rear sight on my P226 as well as a Dawson Precision XD fiber optic up front. The only problem is that the rear sight will slightly hang off the rear of the slide. The benefit is that this slightly increases your sight radius! Link to comment Share on other sites More sharing options...
assaulter Posted July 26, 2010 Author Share Posted July 26, 2010 I'm really at a loss at what to do. The pistol shoots fantastic and it's accurate, but trying to shoot small steel plates is a bitch because I have to aim over the plate to the point that I can't even see my target! I'm just tired of having to adjust for it. Link to comment Share on other sites More sharing options...
bunsen27 Posted July 28, 2010 Share Posted July 28, 2010 I checked the sight and could not identify a make or model, sorry. One other route you might consider is swapping the #8 Dawson front sight for a #9 Sig front sight or a #9 Sig rear. That should move the POI up 1" and 2" at 25yds respectively. You didn't specify if the Dawson front was a plain black, or fiber optic. If it's a FO you might not be clearly seeing the top of the blade due to the FO bulb being too large (bloom effect). According to Dawson's website both the #7 & #8 are .160 tall. I'm guessing that is a typographical error. Might want to give them a call and find out what the #8 is supposed to be and see if they can make you one just a bit shorter. Best of luck. for reference on Sig sight #'s http://www.topgunsupply.com/faq.php Link to comment Share on other sites More sharing options...
spd522 Posted July 29, 2010 Share Posted July 29, 2010 MMC makes an adjustable rear for SIG. I have one on my 226. I got it several years ago but think it was from Brownells. Craig Link to comment Share on other sites More sharing options...
Roar M Posted July 29, 2010 Share Posted July 29, 2010 I'm not a huge fan of adjustable rear sights, but you could always put one of Dawson Precision's Springfield XD adjustable rear sights on your P226. The Springfield XD and Sig P22X dovetails are identical. Currently, I use a Dawson Precision XD fixed rear sight on my P226 as well as a Dawson Precision XD fiber optic up front. The only problem is that the rear sight will slightly hang off the rear of the slide. The benefit is that this slightly increases your sight radius! Does the Springfield rear sight fit without doing anything with the slide? Link to comment Share on other sites More sharing options...
assaulter Posted July 29, 2010 Author Share Posted July 29, 2010 I ordered a PSI adjustable rear from Brownells. Its all I could find and at $40 actually pretty affordable. If it ends up being junk I'm just going to Yvette to get the meprolight. Link to comment Share on other sites More sharing options...
HuskySig Posted July 29, 2010 Share Posted July 29, 2010 I'm not a huge fan of adjustable rear sights, but you could always put one of Dawson Precision's Springfield XD adjustable rear sights on your P226. The Springfield XD and Sig P22X dovetails are identical. Currently, I use a Dawson Precision XD fixed rear sight on my P226 as well as a Dawson Precision XD fiber optic up front. The only problem is that the rear sight will slightly hang off the rear of the slide. The benefit is that this slightly increases your sight radius! Does the Springfield rear sight fit without doing anything with the slide? The Dawson Precision XD rear sights require ZERO modification of the slide. Link to comment Share on other sites More sharing options...
ctkenc Posted August 16, 2010 Share Posted August 16, 2010 I have a #8 dawson front and factory #8 rear and my Sig is shooting 3-4" low at 20 yards. Does anyone know of an adjustable rear? I suggest you read this before you do anything else, and definitely look at the Diagrams that Growler provides links to .... may just answer your question and solve your problem (I had exactly the same problem). He provides and excellent and clear cut description of how SIG's are designed to aim and what sight picture you need if you stay with Sig Sights. Ken http://www.handgunforum.net/sig-sauer/25072-p226r-elite-sights-shoot-too-low.html Link to comment Share on other sites More sharing options...
ctkenc Posted August 16, 2010 Share Posted August 16, 2010 I have a #8 dawson front and factory #8 rear and my Sig is shooting 3-4" low at 20 yards. Does anyone know of an adjustable rear? This is the link you want to read ... may explain how/why you do not need an adjustable rear sight, instead, you have to learn how to use the Sights you already have; at least that was my case. I thought the sights were no good but the problem was that I did not understand their design. Ken http://www.handgunforum.net/sig-gunsmithing/24919-sig-shoots-high-have-questions.html Link to comment Share on other sites More sharing options...
galt11 Posted December 27, 2010 Share Posted December 27, 2010 On my 226 Sport Stock which came with a factory adjustable rear, the sights are from LPA. Adam Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now