italianshooter

Good day to all, i have this question: i want to add on my Dillon 650/750 a flare & expander die more that one on powder measure; have i to put before or after the powder measure? Thanks.

Good day, i have seen this trolley on internet; has someone used it? It is made in Germany do you know the name of manufacturer? In USA it is very expensive and as i live in Italy may be that i can find in Europe. Do you know other fine trolleys? Thank you much, cesare

I'm thinking to mount an RHT thumb rest on my standard pistol (ADC tactical steel); has someone used it? how is your experience about mounting this part on pistol? Thank you for suggestions.

Until some time ago i usually buyed some accessories or grips in some Internet shop like Shooterconnection, speedshooter or others without problems and they shipped to Italy. Now i was trying to buy an Sti aluminum grip (in Usa 360$ in Italy 420 €!) but the same sites reply to me : We cant send gun parts out of the USA So is it a new rule? Is this true for all states or i can buy in some? can someone say to me if i can buy and where? (for italian law i can buy and import all what is not an "essential part of arm" for example springs, sights, sear, trigger group, grips, are not essential part of arm). Thank for the suggestions.

I m trying to contact ARREDONDO to buy some accessories but i have no reply; it s impossible to contact them by e mail or fax; someone knows if Arredondo shop is closed? Thank you.

Hello, i have bought 3 holsters model WSMII and i use them with Paraordnance (16-40 in Italy ADC tactical Steel); one (the red one) is ok and perfectly adjusted; the black and the blue no; my problem is about the retention clip that, for me, is too hard to extract the pistol. So i ask: The right retention clip to use is the Colt model? How can i recognize it ? (is the model for Beretta, Cz, Tanfoglio the one with a B impressed on? Are available different types of retention clip (the one that i have on my red holster seems to be less high than the others)? I have tried the retention clip made from Arredondo, it reduces friction when drawing but i find it too soft and my pistol can crash to the ground. Thank you for suggestions. Best regards, Cesare

Why not stainless? Which is the problem, for you, for stainless pistols? Happy new year to all!

Finally at http://www.sviguns.com/ we can see them; what do you think about?

I have tried spring (11 coil) and follower in my short SVI magazine (12 cm.) with SVI pad but i notice no difference with Grams ; in my mag the capacity is 17 and if i insist a lot 18; no more. Have i to cut the spring?

Can someone help me to find the e mail address of Limcat? Thank so much.

the sights are ok for all old Infinity or the old slide need some accomodation work?

In my 650, when i use Lee factory crimp die to reload 40 SW the cartidges are perfect but the press become a lot hard to use ; can someone suggest a way to solve it? may be that the die is not well setted?

As i have to decide for my new Limcat Wildcat to build i ask which are the best for hammer and sear; Koenig with Egw hard sear or others, Brazos Hammer, BCG - Pro Series Quicksilver with Sear, BCG - Pro Series Match or any others and what for others trigger's group parts? I'll be happy for any suggestions.

I use a 650 from a lot of time; as i would like to buy also a 1050 i ask a comparison of the 2 products specially about "the easy use and easy use to solve problems". Of 650, after 2 years of use, i have a well knowledge. I like the 1050 but i'm in question as i think it may be difficult to use and to maintenance. Is it faster and easy? Is it a good choice?

I would like to have one but, as Brazos writed to me, they "don't have a dealer in Italy and it appears to be almost impossible to get one of our guns into your country. Others have tried and have been unsuccessful." In Italy it's possible to find Limcat but it's not the same thing.

On the left side of the slide is present the EDGE logo or Brazos or nothing?

Can i know the price of the pistol? How many models or versions of limited they do?

Where can i see the guns or the scoop?

I have a new 650 and another old; the old is ok, the new has the shellplate that when move from one station to another stop not always in the same place (i notice in the position of the primer loading) and when the shellplate stop it's not very firmly in his position so i think it's not very precise the alignment in the station 2. I try to explain: when i cycle the machine and the primer seating punch push the primer up sometimes i have problem to put the primer in the case. I repeat for me the problem is the shellplate movement and when it stop not always is in the right position. Can someone suggest a solution?

A have a new 650; after i have removed and put on again the shellplate of the press i see that reloading, when the shellplate moves cartridges from one station to another and stop in the right position it has a little vibration, so a little of the powder in the brass come out. It seems to me that my old Dillon don't have this problem: Someone can help me to solve, if it is a problem, this problem?

Ok, Ok; i'm sure, i don't need it. I only like it. My Glock 23 is for defense use; i shoot every week with Para or Infinity 40Sw limited. No shooting matchs with Glock . I agree with all of you but i like accessory parts for Glock.

I have seen in Italy (made by a gunsmith with american replaced parts) a Glock 23 with a trigger made of metal instead the plastic one. Can someone help me to find it? Who make it? Thank for the help.

Can anyone help me to find a shop online (that accept international orders) to buy this die? (I have had a bad experience with http://www.10ring.com/)

Where can i see and find aluminum or others good grips for my Para?

I have posted because after shooting, as i do with any other steel barrel, i have cleaned AET with soft bronze brush and cotton with Shoother Choice Cleaner a lot of "yellow powder" is appeared out of the barrel. So i have posted my question and so I think that is better no cleaning at all.