Lowsc3
-
Posts
111 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Lowsc3
-
-
15 hours ago, zhunter said:
No cost, just call Sig customer service and they will take care of it. IF you happen to get one who gives you pushback just thank them all call back until you get the “right” person. It is well documented on Enos they are replacing the LCI barrels. Guns born after mid December no longer have the LCI
I'll have to do that, while I'm not having issues with my barrel i plan on putting an optic on soon.
-
So the general consensus is to shoot 124's? I hope so i ordered 1k rounds from peak performance yesterday.
-
Had a buddy do it himself for his 2011 polymer grip. It was easy and it came out great for his first time. I paid a buddy 50 bucks, I think anything over that you are better off doing it yourself.
-
It looks nice but doesn't beat a silicone carbide grip in terms of grip
-
Yea the slide to frame won't be super at this price range. They are not custom guns and aren't frame fit to slide.
-
Doesn't hurt to swap the recoil spring out and test it out. Also hate to be that guy but make sure you aren't limp writing
-
I have one and while it's not a lot of real estate it helps and makes sure i position correctly.
-
GG steel rod and a #12 for me works fine.
-
On 2/3/2020 at 3:52 PM, race1911 said:
...get the LOK Bogies thin....they are basically the same thickness as the CZ thin aluminum but are much more aggressive
Well now I have to get them! My TSO grips are a little to slick especially when i compare to my silicone carbide x5
-
Always go in with fully loaded mag's even if its a 15 round stage and you have 4, 23 round mags. You wont lose anything by carrying it with you and in case of a malf with either a mage or the gun its sometimes easier to drop a mag an rack the slide
-
On 4/19/2016 at 3:52 PM, Hi-Power Jack said:
Depends ...
If I shoot with friendly better shooters, they will sometimes offer great
suggestions that help.
But, I've also shot with a few "better shooters" who were not too
I got the most out of a local shooter who is just a bit better than me -
we discussed the COF's and made plans to shoot beyond what I
normally would have - and it works, sometimes.
But, I LOVE to shoot, now and then, with newbies who can't believe
how "good" I am - and ask for my help.
Probably depends on how I feel that particular day, also.
I agree, I tend to shoot with people better then me but they criticize and help me get better. I have shot in squads that were all just newbies and there wasn't much to gain for me, just made me feel like a star.
-
It's all a bit of both. I started competing with an m&p 2.0 compact and I learned alot with that the first couple months. I then got a a sig x 5 and I made alot more progress! Admittedly I bought a TSO. 40 on whim cause it was at the store and it was an impulsive buy and I wanted to shoot major. At the very least i know the issue with my shooting is definitely the Indian not the bow.
-
It's called OK corral. They have uspsa, 2 gun, steel and cowboy stuff
-
2 hours ago, Sego23 said:
I been to GTR once and it was fun, but the 2 hour drive killing me. LOL
I do a 2 hour each way drive to lake Okeechobee one or two times a month. The matches are just better
-
Hello everyone!
I bought my m3k freedom a couple months back and have had a hard time loading. I figured once I opened her up more it would solve the issue. I had the loading port opened and got the TTI lifter and it does help, however I feel like at time the front edge lip of the shells will catch on the receiver like the lifter is going to far low or its just not well channeled/tapered.
I also noticed it takes a bit of effort to get the shells in, I feel like the shell catch is a bit stiff and rough?
I'm going to be ordering a low drag follower soon to try out to at least alleviate the effort going in. Any hints or tips helps!
-
There's shoot GTR in Gainesville, they have some fun matches and do 3 gun and what not. You should check it out.
-
This looks beautiful. When will they be available in 40?
-
It does look good I gotta say
-
Congratz on the purchase! I recently got one myself and my only issue was a weak factory extractor spring right out of the box. If you are ordering from czc site might want to add 2 or 3 springs in case you get extraction issues.
-
I can happily report after replacement of the extra strength extractor spring, I went out to the range and put 100 rounds with no issues whatsoever. I'll be doing a local uspsa match tomorrow.
-
14 hours ago, Lior said:
I asked for a niner instead. No problems except reduced points in stages.
Gotcha, well my springs arrive today I'll get it installed and try going to the range after work to test. I'll keep everyone posted
-
On 1/11/2020 at 12:27 PM, Lior said:
My TS40 went back to CZ for this exact reason. Even after deburring the chamber and changing the extractor. I haven't shot Major Power Factor since.
So after it came back from cz it still had the issue?
-
5 hours ago, loaded605 said:
Okay just making sure I saw this one but since it didn't say tso or ta specifically I was skeptical. I'm gonna order now and hopefully I'll report back soon!
-
23 hours ago, loaded605 said:
Common problem. Mine did it. I know two guys who bought theirs at the same time from the same store. Need the extra power extractor spring. Also keep it clean back there before majors. Friend who shoots a Shadow 2 also put it in, despite the warning not too and it is more reliable.
Can you possible provide a link for the extra power ? I'm scared to get the wrong one.
4 hours ago, yigal said:we have many of them (TSO) in the club but in 9mm. few of them over 60k .we use only factory ammo .
if u keep this gun clean and remove dirt from extractor channel every 2k it will work 100%.
best cz that will ever be.
I don't mind cleaning the pistol but it should be happening out of the box and having this issues repeat so many times under 500 rounds.
6 hours ago, loaded605 said:Lol, I've read of lots of people with .40 TSO's having this issue. It works out of the gate, but after the extractor channel gets dirty it hiccups. I've not had an FTE since replacing the spring 8,000 rounds ago.
That's what Im hoping for!
Sig P320 X-Five Alpha
in Sig
Posted
Yea i bought the regular x-five then the legion came out so i bought the grip , and now this . I'm happy with my TXG grip and silicone carbide, but i wonder if they will sell this metal grip alone.