racegun9

Dan, I had the scope off last Saturday and also painted the ejection port with dykem blue. I could not see any kind of mark on the dykem. Most cases arc up about 1 o'clock and out 4-5 feet, But some do some really wierd things. I'm using all once fired Federal cases that have been run thru the case-pro. Loading 1.150 with a 125JHP Zero and SP-2 powder. SV mags, some with spacers and some not. The spacer mags seem to keep the ejection a little more consistent but still high. If I do have the cmore on and tape the bottom, almost every case will leave a mark on the tape. The hit point on the ejector just does not seem to change the ejection pattern. The latest ejector is a limcat from Chuck and I have it hiting at the very top & inside. I'm thinking I might need to send it to you for an expert opinion. Jeff Open gun blues

Yes, I have the SVI interchangable breech face and used the 38 super one, not the rimless one. I have tried various tension levels as well. Thanks Jeff

I had both springs in when I was trying the aftec. Jeff

Yes, it is fitted tight to avoid the clocking (turning) issue. Then I had another FP stop to use with the radius edge's for the aftec. Jeff

I have a SV Slide & Frame built gun with a 9mm breechface and 5.4" AET barrel. No matter what extractor or ejector set-up I use, the empty case comes out erratic and mostly high and hits the bottom of the cmore. I've tried the Aftec and regular extractor's and have plenty of extractor tension. I've also tried all different length ejectors and ejector hit points. I have it hitting at the very top of the ejector right now. Nothing really seems to change it. Also, if you take the mag out and fire the last round the empty will drop out the bottom of the grip most of the time. With the scope off the empties will arch up and out about 5 feet most of the time but sometimes come forward or backward or dribble out. Its not hitting the bottom of the ejection port. Anyone have any idea's to check before I send it to Benny, or Dan or one of the Pro smiths willing to take a shot at it. Thanks in advance Jeff